If you are sourcing a spatula for spreading frosting for a US retail or own-brand program, the useful starting point is not a photo of a cake. It is the written brief your supplier will quote from. Icing spatulas, also called frosting spatulas or palette knives, are selected by working length and blade angle, and the packaging you plan around that blade should be settled before sampling. This guide uses the currently published Juneshing pages for the PP-handle icing lines and separates what is listed from what you still need to confirm.
Start With the Listed Model Attributes
The Griddle Spatulas, Icing Spatulas & Scrapers category places icing blades alongside griddle turners and bench scrapers. That matters for buyers because the word “spatula” covers different working tasks. A griddle turner is selected for lifting and turning food; an icing spatula has a palette-knife profile for spreading and smoothing. The category page also warns that some SP-series photographs show a family of shapes rather than one fixed-piece kit, so a model number alone may not identify a single tool.
The three PP-handle icing pages give a workable comparison set because each lists a component code, a size in centimeters, and a weight:
| Model | Listed type | Listed icing component | Listed size | Listed weight |
|---|---|---|---|---|
| SP-PP01 | Offset icing spatula, PP handle | SP-PP01-006, angled icing spatula | 25 × 2.5 cm | 61 g |
| SP-PP02 | Angled icing spatula, PP handle | SP-PP02-008, angled icing spatula | 29.5 × 3.6 cm | 61 g |
| SP-PP03 | Straight icing spatula, PP handle | SP-PP03-004, straight icing spatula | 35 × 3.3 cm | 119.7 g |
All three are listed as stainless steel blades with PP handles. Each page carries the same listed minimum order of 1,000 pcs and a listed production lead time of 35–45 days, and each page asks buyers to confirm whether the quantity is measured per individual tool or per complete set. That confirmation step belongs in your quotation request, not in an assumption about the carton.
Match the Blade Shape to the Packaging Brief
The packaging brief is where an icing spatula program usually gets more specific than the product page. The offset format on PP Handle Offset Icing Spatulas – SP-PP01 is a range that includes an angled icing spatula and scraper profiles, with the offset blade stepping below the handle line. The SP-PP02 page describes its angled icing blade as helping the user work across a cake surface while holding the handle above the working area. The SP-PP03 page describes the straight palette-knife format as following the handle line, giving a different working angle from an offset blade. Those are the listed distinctions; the choice still depends on your sample.
For a packaging brief, write down the dimensions you are designing around rather than the marketing name:
- Usable blade and overall length. The listed dimensions do not state whether they refer to the blade or the whole tool. A dimensioned drawing showing usable blade length, overall length and handle dimensions is the item to request before approving artwork.
- Order unit. Ask whether SP-PP01, SP-PP02 or SP-PP03 is quoted per tool or per set, because the listed 1,000 pcs minimum is stated in those terms on each page.
- Component reference. Use SP-PP01-006, SP-PP02-008 or SP-PP03-004 rather than only the family code when a photo shows several shapes.
- Packing format and destination. Each product page asks that the quotation identify the exact component selection, packing format and destination.
Logo and custom packaging are listed at a 2,000-piece threshold on all three PP-handle pages, separate from the 1,000 pcs minimum order. Treat these as two distinct listed figures and confirm the current terms for the exact configuration in your quote rather than assuming they are bundled.
Sample and Quotation Checks for Frosting Tools
The source pages repeatedly frame sample and packaging as things to discuss, not as automatic inclusions. A practical quotation request for this product family can include the following buyer checks, drawn from what the pages ask for:
- State the model reference and selected component code, for example SP-PP02 plus SP-PP02-008.
- State quantity, and ask whether the order unit is a single tool or a set.
- State packing or logo requirements and ask for current sample cost, freight, logo options and packaging MOQ for the selected configuration.
- State destination and required delivery date.
- Request a dimensioned drawing and the approved packing list before bulk production.
- Obtain a sample of the exact configuration you intend to order.
Because the pages list a 35–45-day production lead time, ask the sales team to confirm the current schedule rather than planning to the published figure. Nothing in these sources confirms pricing, stock, certifications, country-specific terms or compatibility with a particular cake-decorating task, so your own sample evaluation stays the deciding evidence.
Work the Brief Through the Right Page
Send your selected model numbers, quantities, packaging brief and destination through the quotation route on the relevant product page. The SP-PP03 straight icing spatula page and the SP-PP01 and SP-PP02 pages each carry the same request form and the same instruction to include the purchasing brief. If your assortment mixes blade angles, quote each component code separately so the sample, drawing and packing list all refer to the same tool. The category page remains the fastest way to see which icing, griddle and scraper profiles sit beside one another before you narrow the brief.