An offset pastry spatula is easiest to buy when you treat the blade shape, component reference and quotation unit as separate decisions. This buyer sourcing guide walks through the current PP-handle icing spatula options listed by Juneshing, then shows what to confirm before you approve a wholesale order.
Start with the working task, not the word “spatula”
The catalog separates griddle turners from icing tools. A griddle spatula supports food while turning or lifting it from a flat cooking surface, while an icing spatula is a palette-knife profile used for spreading and smoothing. As a buyer, match the blade to the intended work rather than relying on the shared word “spatula.”
For an offset pastry spatula brief, the offset format is the key selection point. The straight palette-knife format places the blade in line with the handle; an offset blade steps below it, which changes the working angle. Confirm which geometry your end user expects before you compare model references.
Compare only current verifiable model attributes
The product pages list stainless steel blades with PP handles across the PP range. Use the table below to compare the listed component references and dimensions. Treat these as listed values to confirm against an approved drawing, not as guaranteed final specifications.
| Model | Listed type | Listed component | Listed size | Listed weight |
|---|---|---|---|---|
| SP-PP01 | Offset icing spatula, PP handle | SP-PP01-006 angled icing spatula | 25 × 2.5 cm | 61 g |
| SP-PP01 | Spatula scraper | SP-PP01-019 | 24.3 × 10 cm | 118.2 g |
| SP-PP01 | Fish spatula scraper | SP-PP01-021 | 28.4 × 8.3 cm | 79 g |
| SP-PP02 | Angled icing spatula, PP handle | SP-PP02-008 angled icing spatula | 29.5 × 3.6 cm | 61 g |
| SP-PP03 | Straight icing spatula, PP handle | SP-PP03-004 straight icing spatula | 35 × 3.3 cm | 119.7 g |
| SP-PP03 | Spatula scraper | SP-PP03-017 | 33.3 × 7.7 cm | 197.4 g |
Two cautions come directly from the pages. First, SP-PP01 and SP-PP02 are described as ranges that include angled icing spatula and scraper profiles, and some SP-series photographs show a family of shapes rather than one fixed-piece kit. Second, the listed dimensions do not automatically tell you whether the measurement refers to the blade or the whole tool. Ask for a dimensioned drawing showing usable blade length, overall length and handle dimensions.
Understand the range-versus-set distinction
If your brief says “offset icing spatula set,” do not assume every pictured blade ships together. The SP-PP02 page states that the image shows multiple options and that you should request a selected component list and quantity rather than assuming every pictured blade is included in one set. The same logic applies across the SP series.
Choose one of three approaches before pricing:
- Single component: specify one reference, such as SP-PP01-006, and confirm it can be supplied individually.
- Selected assortment: list each component code and its quantity explicitly.
- Coordinated range: reference the family and ask the team to confirm what the order unit actually contains.
Whichever route you take, your request should identify the blade profile, component reference, overall length and handle material so sampling and bulk-order comparisons stay consistent.
Sample and quotation checks
The listed terms currently state 1,000 pcs minimum orders and 35–45-day production lead times, with model-specific logo and packaging thresholds. Because the pages repeat the instruction to confirm current terms, your quotation request should verify rather than assume each of these points.
- Order unit: confirm whether the 1,000 pcs minimum is quoted per individual tool or per complete set.
- Schedule: ask for the current production schedule rather than relying on the listed 35–45 days.
- Logo and packaging: the listed threshold is 2,000 pieces for logo and custom-packaging requests; confirm artwork position, finish, packaging layout and the order unit before approving a private-label project.
- Samples: samples and packaging options are available for discussion; ask for current sample cost, freight, logo options and packaging MOQ for your exact configuration.
- Drawing approval: obtain a sample of the exact configuration and approve a dimensioned drawing plus the final packing list before bulk production.
A complete request typically includes model reference, selected pieces, quantity, packing or logo requirements, destination and required delivery date. Adding a reference image helps when several blade or handle options exist in one range.
Link out only after the brief is defined
Start from the griddle and icing spatulas collection to see the full group of twelve listed results, then open the three PP-handle icing models: SP-PP01 offset icing spatulas, SP-PP02 angled icing spatulas and SP-PP03 straight icing spatulas. Use these pages to confirm current listed attributes with the team, not as a substitute for an approved drawing.
Juneshing supplies grill, barbecue and kitchenware products through its trading and manufacturing business. Use these model references to open a defined product conversation rather than sending a vague request for “offset pastry spatulas” and hoping the returned sample matches your shelf plan.