A small icing spatula is not simply a scaled-down frosting tool. For wholesale buyers, the term usually points to a specific blade-and-handle combination that must be matched to a working task, a retail assortment and a packaging brief. Juneshing’s current catalog lists PP handle icing spatula ranges where the icing component sizes run from 25 cm up to 35 cm in listed length, so “small” needs to be defined against those documented options rather than assumed. This guide sets out the buyer checks that keep sampling and bulk-order comparisons consistent, using only the attributes published on the live product pages.
What “small icing spatula” means in a sourcing brief
In the Juneshing category, an icing spatula is also described as a frosting spatula or palette knife, and buyers are advised to select it by working length and blade angle. The smallest listed icing component appears in the SP-PP01 range at 25 × 2.5 cm, while SP-PP02 lists an angled icing component at 29.5 × 3.6 cm and SP-PP03 lists a straight component at 35 × 3.3 cm. A brief that asks only for a “small” icing spatula therefore leaves the supplier guessing. State the component reference, the usable blade length and the overall tool length you intend to buy.
Handle material is a separate variable. The SP-PP01, SP-PP02 and SP-PP03 pages describe stainless steel blades with PP handles, while the category also includes wood handle icing options such as the Wood Handle Icing Spatula Range SP-W01M and Wood Handle Straight Icing Spatulas SP-W01R. Match the handle family to your channel before requesting a quotation.
Small icing spatula specification checklist
Use the following checklist to turn a vague request into a comparable one. Every line below reflects a field that the live product pages expose or ask buyers to confirm.
| Check | What the source lists | What the buyer must confirm |
|---|---|---|
| Model reference | SP-PP01, SP-PP02, SP-PP03 | Which range and component code applies |
| Product type | Offset, angled or straight PP handle icing spatula | The blade angle required by the end task |
| Material and finish | Stainless steel blades with PP handles | Finish details for the selected component |
| Selection | Icing spatula and scraper profiles | Whether the icing blade alone is ordered |
| Listed dimensions | SP-PP01-006: 25 × 2.5 cm; SP-PP02-008: 29.5 × 3.6 cm; SP-PP03-004: 35 × 3.3 cm | Approved drawing for the chosen component |
| Listed weight | 61 g, 61 g and 119.7 g for the icing components above | Whether weight affects pack or freight planning |
| Order unit | Listed minimum 1,000 pcs; quoted per tool or per set to be confirmed | The exact ordering unit in the quotation |
| Lead time | Listed 35–45 days; current schedule to be confirmed | Current production schedule for your order |
| Logo and packaging | Listed threshold 2,000 pieces for logo and custom-packaging requests | Artwork position, finish and packing layout |
Blade angle: offset, angled or straight
The three PP ranges are not interchangeable. SP-PP01 is described as a PP-handle spatula range that includes an angled icing spatula and scraper profiles, with an offset blade format that gives cake-decorating buyers a clear option to compare with straight palette knives. SP-PP02 offers angled icing and scraper options, and the page notes that an angled icing blade helps the user work across a cake surface while holding the handle above the working area. SP-PP03 covers straight icing spatulas and scraper profiles, and the page explains that a straight blade follows the handle line while an offset blade steps below it. Choose the shape for the working angle, then sample it with the intended task.
Component code and drawing control
Several SP-series photographs show a family of shapes rather than one fixed-piece kit. The SP-PP01 page states the primary image presents a range of shapes rather than a confirmed fixed-piece kit, and the SP-PP02 page advises requesting a selected component list and quantity rather than assuming every pictured blade is included. Ask for a drawing matched to the photograph for the component you intend to buy, especially where several lengths share a model family.
Quotation checks before you commit
A comparable quotation should identify the exact component selection, packing format and destination. The live pages also ask buyers to confirm whether the listed minimum quantity is measured per individual tool or per complete set, and to confirm the current production schedule rather than relying on the listed lead time. For private-label projects, discuss artwork position, finish, packaging layout and the order unit before approving, and obtain a sample of the exact configuration.
- Send model reference, selected pieces, quantity, packing or logo requirements, destination and required delivery date.
- Add the reference image if you are choosing from several blade or handle options.
- Ask for current sample cost, freight, logo options and packaging MOQ for your selected configuration.
- Approve the final packing list before bulk production.
Where small icing spatulas fit in a range
Buyers often assemble an icing and scraper assortment rather than a single tool. The Griddle Spatulas, Icing Spatulas & Scrapers category shows twelve results, including the 3-Piece Stainless Steel Icing Spatula Set SP-W02, which is shown as a three-length offset selection, alongside wood handle and PP handle families. The category page also notes that a scraper or griddle turner serves a different task from an icing blade, which is a useful boundary when building a baking set. Compare the SP-PP02 page for the angled option at PP Handle Angled Icing Spatulas – SP-PP02, and the SP-PP01 page for the offset option at PP Handle Offset Icing Spatulas – SP-PP01, so that the small icing spatula sits alongside complementary profiles rather than duplicating one blade shape.
Finally, treat the specification fields as the basis for discussion, not as a finished contract. Each PP page directs buyers to confirm the approved drawing, the order unit and the current schedule, and Juneshing describes itself as a trading and manufacturing company specializing in grill/BBQ tools and kitchenware products including spatulas and kitchen knives. Keep your own required delivery dates, artwork approvals and packing standards in the brief, and let the supplier confirm what applies to your exact configuration.