An icing or scraper range photographed as a family of shapes is not automatically one fixed kit. On Juneshing’s own catalogue pages, the tool is selected piece by piece, and the reference code is what you order. For New Zealand buyers building a wholesale brief, the practical task is comparing the reference codes that actually exist, then confirming the commercial details in writing before sampling or ordering.
Why the component code decides what you receive
SP-PP01 and SP-PP03 are both listed as PP-handle spatula ranges with stainless steel blades. Each page states clearly that the selection includes icing profiles and scraper profiles, and each carries the same warning: the primary image presents a range of shapes rather than a confirmed fixed-piece kit. Specify the component code and size for each requested item.
That single sentence changes how a quote should be written. Instead of asking for “the offset spatula”, you name the component. It keeps sampling, drawing approval and bulk-order comparison tied to one repeatable item.
Offset versus straight: two listed blade formats
SP-PP01 is the offset format. The page describes it as an angled icing spatula and scraper range, where the offset blade steps below the handle line, giving cake-decorating buyers a clear option to compare with straight palette knives.
SP-PP03 is the straight format. Its blade follows the handle line, which the page presents as a different working angle from an offset icing spatula. Both pages advise selecting by blade geometry and usable reach rather than by name alone.
Neither format is described as superior. The page guidance is to choose the shape for the task: spreading icing across a cake, working near an edge, or gathering material on a preparation surface, then sample it against that task.
Listed component dimensions from the product pages
Only the components named below carry published sizes and weights. Other profiles in the same family are described only as options, so their dimensions must be requested rather than assumed.
| Model | Reference | Tool | Listed size | Listed weight |
|---|---|---|---|---|
| SP-PP01 | SP-PP01-006 | Angled icing spatula | 25 x 2.5 cm | 61 g |
| SP-PP01 | SP-PP01-019 | Spatula scraper | 24.3 x 10 cm | 118.2 g |
| SP-PP01 | SP-PP01-021 | Fish spatula f scraper | 28.4 x 8.3 cm | 79 g |
| SP-PP03 | SP-PP03-004 | Straight icing spatula | 35 x 3.3 cm | 119.7 g |
| SP-PP03 | SP-PP03-017 | Spatula scraper | 33.3 x 7.7 cm | 197.4 g |
Both pages state that listed dimensions should be matched with the selected tool through the component reference, and that the approved drawing should be confirmed. Treat the table as a starting point for a drawing request, not as a finished specification.
Buyer checks before a sample or quotation
Work through a short checklist so the reply you receive can be compared like for like:
- Name the model and the component code for every item in the brief, rather than the range name alone.
- Ask what the listed size measures. The category page advises confirming both usable blade length and overall length on a dimensioned drawing, since a single figure may not describe the whole tool.
- Confirm the order unit. Both SP-PP01 and SP-PP03 list a 1,000 pcs minimum, and both pages ask buyers to confirm whether that quantity is quoted per tool or per complete set.
- Confirm the current production schedule. A listed 35-45 day lead time appears on both pages, with the instruction to confirm it rather than assume it.
- Define the sample configuration before it ships, including the component, handle, blade shape and any reference image you are choosing from.
- Check the logo and packaging threshold for the exact model, then discuss artwork position, finish, packaging layout and order unit before approving private-label work.
- Approve the drawing and packing list before bulk production, as both pages recommend.
A quotation brief is easier to answer when it states the model reference, selected pieces, quantity, packing or logo requirements, destination and required delivery date. The contact page is the route for sending that brief to the team.
Comparing related options in the same category
The wider category lists twelve griddle, icing and scraper items, including wood-handle families and bench scrapers alongside the PP-handle ranges. If your assortment mixes a scraper task with an icing task, compare the task first, then the model.
Two references sit closest to the offset versus straight question: the PP Handle Offset Icing Spatulas – SP-PP01 and the PP Handle Straight Icing Spatulas – SP-PP03. Each page cross-links to the other, so the blade-angle decision can be made from the same set of listed facts. The Griddle Spatulas, Icing Spatulas & Scrapers category page is the place to check which handle families and blade profiles sit alongside them.
Frequently asked questions
How is a straight icing blade different from an offset blade?
The SP-PP03 description states that a straight blade follows the handle line, while the SP-PP01 description states that an offset blade steps below it. Both pages advise choosing the shape that suits the working angle and sampling it with the intended cake-decorating task.
Do the listed dimensions refer to the blade or the whole tool?
Neither product page says which. The category page instructs buyers to confirm both measurements for the selected component and to request a dimensioned drawing showing usable blade length, overall length and handle dimensions before approval. Until that drawing is issued, the figure should be treated as unconfirmed.
Can I order one component on its own?
The pages do not state that a single component can be supplied individually. They instruct buyers to specify the component code and size for each requested item, and the category FAQ asks whether a blade shape can be supplied alone or only in a selected assortment. That answer must come from the quotation, not from the catalogue.
What should I send to obtain a price?
Both product pages list the same request contents: the model reference, selected pieces, quantity, packing or logo requirements, destination and required delivery date, plus a reference image if you are choosing between blade or handle options.