An offset icing spatula is selected by blade angle, working length and handle material. For buyers building a cake-decorating or kitchen-utensil range, the practical question is which listed component matches the task, then what to confirm before a quotation is issued. This guide uses the current Juneshing catalog pages as the only product evidence and keeps the checks you should make, rather than assuming terms.
Start with the working task, then the blade shape
The catalog describes an icing spatula, also called a frosting spatula or palette knife, as selected by working length and blade angle. A straight blade follows the handle line, while an offset blade steps below it. Juneshing also notes that a scraper or griddle turner serves a different task from an icing blade, so mixing those functions in one line item can blur a specification.
For a bakery or decorating assortment, buyers often compare three PP-handle directions:
- PP Handle Offset Icing Spatulas – SP-PP01, described as a range that includes an angled icing spatula and scraper profiles, with the offset format offered as a comparison against straight palette knives.
- PP Handle Angled Icing Spatulas – SP-PP02, described as angled icing and scraper options with PP handles, intended for buyers comparing blade lengths and working shapes.
- PP Handle Straight Icing Spatulas – SP-PP03, described with straight icing spatulas and scraper profiles, where the straight palette-knife format provides a different working angle from an offset icing spatula.
These are shape and selection differences stated on the pages. They are not performance claims, and the pages do not rank one shape above another.
Compare only the dimensions the pages list
The strongest buyer check is to match a component reference to a listed size and weight. The table below uses only the figures shown in the current source pages.
| Model reference | Page description | Listed component | Listed size | Listed weight |
|---|---|---|---|---|
| SP-PP01 | Offset icing spatula, PP handle | SP-PP01-006 angled icing spatula | 25 × 2.5 cm | 61 g |
| SP-PP01 | Offset icing spatula, PP handle | SP-PP01-019 spatula scraper | 24.3 × 10 cm | 118.2 g |
| SP-PP01 | Offset icing spatula, PP handle | SP-PP01-021 fish spatula scraper | 28.4 × 8.3 cm | 79 g |
| SP-PP02 | Angled icing spatula, PP handle | SP-PP02-008 angled icing spatula | 29.5 × 3.6 cm | 61 g |
| SP-PP03 | Straight icing spatula, PP handle | SP-PP03-004 straight icing spatula | 35 × 3.3 cm | 119.7 g |
| SP-PP03 | Straight icing spatula, PP handle | SP-PP03-017 spatula scraper | 33.3 × 7.7 cm | 197.4 g |
Each page states that the listed dimensions should be confirmed with an approved drawing. It also asks whether dimensions refer to the blade or the whole tool, and recommends confirming both the usable blade length, overall length and handle dimensions. For a offset icing spatula packaging brief for buyers, those two measurements decide the retail pack length and the internal fit, so they belong in the brief before artwork is approved.
Treat the product image as a range, not a fixed kit
Both the category page and the model pages warn that some SP-series photographs show a family of shapes rather than one confirmed fixed-piece kit. The category page asks buyers to identify the blade profile, component reference, overall length and handle material, and to request a drawing matched to the photograph.
This matters because the SP-PP01 page lists several distinct components, and the SP-PP02 page states the image shows multiple options and that buyers should request a selected component list rather than assume every pictured blade is included in one set. A quotation brief should therefore do four things:
- Name the model reference, such as SP-PP01, SP-PP02 or SP-PP03.
- List each selected component code and quantity, rather than a picture count.
- State whether the order unit is an individual tool or a complete set.
- Attach a reference image only as a selection aid, alongside the written codes.
Sample and quotation checks before committing
The listings show a common set of terms that a buyer should verify in writing, because several are marked as needing confirmation. The PP handle pages state a listed minimum order of 1,000 pcs and a listed production lead time of 35–45 days, and each asks the sales team to confirm whether the quantity is measured per individual tool or per complete set, as well as the current schedule. The pages also list a threshold of 2,000 pieces for logo and custom-packaging requests.
A practical sample stage should include:
- A sample of the exact configuration, not a representative shape from the family.
- The approved drawing for the selected component, showing usable blade length, overall length and handle dimensions.
- Confirmation of material and finish: the pages describe stainless steel blades with PP handles for these models.
- A draft packing list that matches the component codes and the packaging brief.
- Written confirmation of sample cost, freight, logo options and packaging MOQ for that configuration.
None of these items should be assumed from a category page. They are confirmation points, and the source pages explicitly present them as items to confirm.
Check handle family and adjacent tools
The catalog includes both PP and wooden handle families. Wood-handle icing options appear on the category page, including Wood Handle Icing Spatula Range – SP-W01M and Wood Handle Straight Icing Spatulas – SP-W01R, while the PP-handle pages cover offset, angled and straight formats. The pages state that material, finish and available customization must be confirmed for the particular model and component.
Bench scrapers are a separate buying decision. The category page lists Stainless Steel Bench Scraper with Scale – GC-P02 and Wood Handle Dough and Bench Scraper – GC-W01A, and notes that a bench scraper helps divide dough, collect ingredients and clear a compatible preparation surface. It also asks buyers to confirm blade dimensions and scale units before designing packaging. If a range brief mixes icing blades and bench scrapers, keep separate component lists so the packaging review does not carry the wrong dimensions.
What to send for a relevant reply
The category page asks buyers to send selected model numbers, quantities, packaging brief and destination so the team can prepare a relevant reply. It also states that Juneshing handles grill and kitchenware sourcing briefs. For the offset icing spatula line, a concise request should identify the model and component codes, the order unit, the handle material, the packing format, any logo requirement and the destination, plus a required delivery date if one exists.
Buyers can review the full range on the griddle and icing spatulas category page and send the finished brief through the contact page. Keeping the brief tied to listed component references is the simplest way to keep sampling and bulk-order comparisons consistent.