An offset icing knife is a palette-knife style tool used to spread and smooth icing. For wholesale buyers, the useful first step is not choosing a pretty handle, but defining the blade geometry, working length and component code you actually want to purchase. This guide walks through an offset icing knife specification checklist using only the live Juneshing catalog pages, so your sample request and quotation match the same tool.
Start with the working angle, not the handle
The Juneshing catalog distinguishes offset, angled and straight icing spatulas. The offset format steps the blade below the handle line. The angled format is also offered in the catalog, while the straight palette-knife format has a different working angle from an offset icing spatula. The definition matters because a straight blade follows the handle line, whereas an offset blade steps below it.
So a simple checklist begins with the intended cake-decorating or spreading task, then the shape that matches it. The catalog states that icing spatulas are selected by working length and blade angle. It also warns that the primary image for SP-PP01 presents a range of shapes rather than a confirmed fixed-piece kit. That is a buyer check, not a product claim.
Compare only the model attributes that are listed
Stick to what the live pages state. The materials and selections listed are consistent across the SP-PP range: stainless steel blades with PP handles. The listed component dimensions are also specific to each model, so compare them side by side.
| Model | Product type | Listed component | Listed size | Listed weight |
|---|---|---|---|---|
| SP-PP01 | Offset icing spatula, PP handle | Angled icing spatula SP-PP01-006 | 25 × 2.5 cm | 61 g |
| SP-PP01 | Offset icing spatula, PP handle | Spatula scraper SP-PP01-019 | 24.3 × 10 cm | 118.2 g |
| SP-PP01 | Offset icing spatula, PP handle | Fish spatula scraper SP-PP01-021 | 28.4 × 8.3 cm | 79 g |
| SP-PP02 | Angled icing spatula, PP handle | Angled icing spatula SP-PP02-008 | 29.5 × 3.6 cm | 61 g |
| SP-PP03 | Straight icing spatula, PP handle | Straight icing spatula SP-PP03-004 | 35 × 3.3 cm | 119.7 g |
| SP-PP03 | Straight icing spatula, PP handle | Spatula scraper SP-PP03-017 | 33.3 × 7.7 cm | 197.4 g |
Note the shape ranges. SP-PP01 is described as a PP-handle spatula range that includes an angled icing spatula and scraper profiles. SP-PP02 offers angled icing and scraper blade options. SP-PP03 includes straight icing spatulas and scraper profiles. Each page asks buyers to confirm the approved drawing and to specify the component code and size for each requested item.
Build the offset icing knife specification checklist
A practical checklist for an offset icing knife or similar icing tool should capture what the pages actually ask you to confirm:
- Model reference — for example SP-PP01, SP-PP02 or SP-PP03.
- Component/component code — such as SP-PP01-006, SP-PP02-008 or SP-PP03-004.
- Blade profile — offset, angled or straight, and whether a scraper profile is also required.
- Listed size — the page dimensions for the selected component.
- Handle material — PP handle per the SP-PP listings.
- Blade material and finish — stainless steel blades listed on the product pages.
- Blade vs overall length — confirm both, because the pages ask buyers to request a dimensioned drawing showing usable blade length, overall length and handle dimensions before approval.
- Order unit — ask whether the quantity is quoted per individual tool or per set.
- Packing format and list — confirm the approved packing list before production.
- Logo and custom-packaging threshold — listed at 2,000 pieces for logo and custom-packaging requests.
That last point is a stated threshold on the product pages, not a guarantee for every order. Confirm it with the sales team for the exact configuration.
Sample and quotation checks before bulk order
Treat the catalog pages as a brief-building tool. The listed minimum order for SP-PP01, SP-PP02 and SP-PP03 is 1,000 pcs, with a listed production lead time of 35–45 days. The pages themselves say to confirm whether that quantity is measured per individual tool or per complete set, and to confirm the current production schedule. They also state that samples and packaging options are available for discussion, and that current sample cost, freight, logo options and packaging MOQ should be requested for the selected configuration.
Your quotation request should identify the exact component selection, packing format and destination, plus quantity, logo artwork, packaging requirements and required delivery date. If you are choosing from several blade or handle options, add the reference image. The pages also note that a product page photograph may show a family of shapes rather than a fixed-piece kit, so ask for a drawing matched to the photograph where several lengths share a model family.
Questions to send with your request
- Which component code and size do you want quoted — for example, is SP-PP01-006 the exact angled icing component?
- Is the listed minimum measured per tool or per set?
- What are the current sample cost and freight for the selected configuration?
- What is the current logo and custom-packaging threshold for this model?
- What is the current production schedule for the exact configuration and destination?
Match the selection to the catalog
If your brief calls for an offset icing knife, start from the PP Handle Offset Icing Spatulas | SP-PP01 page, which lists the offset blade format and its component dimensions. Compare it with the PP Handle Angled Icing Spatulas | SP-PP02 for a listed 29.5 × 3.6 cm angled component, and with PP Handle Straight Icing Spatulas | SP-PP03 for a listed 35 × 3.3 cm straight component. The wider category of griddle spatulas, icing spatulas and scrapers also includes wood-handle ranges, sets and bench scrapers if your assortment needs more than one tool shape.
The category page notes that Juneshing handles grill and kitchenware sourcing briefs, and that you should provide quantities, logo artwork, packing requirements and destination so the team can quote the selected tools. It also states that Juneshing is a trading and manufacturing company specialized in grill and BBQ tools and kitchenware products, mainly including spatulas and kitchen knives. That is context for the brief, not a substitute for confirming the specific model terms in writing.
Next step
Use the checklist above to turn a vague request for an offset icing knife into a defined sourcing brief: model, component code, blade shape, listed size, handle material, order unit and packing requirement. Then request a quotation from the matching product page or the category page, and ask the team to confirm drawings, current terms and schedule for the exact configuration.