A metal griddle spatula is a flat-top cooking tool designed to support food while turning or lifting it from a flat cooking surface. For wholesale buyers, the useful question is not which single blade is “best” in the abstract, but which listed configuration, handle family, and component mix matches your retail pack and your customers’ cooking surfaces. This guide walks through the current Juneshing griddle spatula listings so you can prepare a quote request without guessing.
Start With the Working Task, Not the Model Name
The category page explains that a griddle spatula supports food while turning or lifting it from a flat cooking surface, and that buyers should compare long blades, broad turners, and slotted profiles by the food being handled. That framing matters because “metal griddle spatula wholesale quote requirements” should begin with a defined job: pancakes and eggs, burgers and fish, or general flat-top preparation. Each task points to a different blade width, length, and edge profile.
The same page also notes that you should check the cooking-surface manufacturer’s guidance before specifying metal utensils for coated cookware. That is a buyer-side check, not a product performance claim, and it belongs in your specification notes before sampling.
Compare Only the Listed Wood-Handle Configurations
Two current listings use wooden handles with stainless steel blades. The five-piece set and the six-piece set are the closest comparison pair, so treat the extra piece as a configuration decision rather than an automatic upgrade.
5-Piece Wood Handle Griddle Spatula Set (SP-W01)
Listed as a five-piece set combining stainless steel blades with wooden handles. The selection is described as five turning and scraping tools. The component table lists these references:
- SP-W01-01 Griddle Long Spatula — 37*7.3cm, 188.6g
- SP-W01-02 Griddle Slotted Spatula — 31.4*7.3cm, 149.8g
- SP-W01-03 Griddle Scraper spatula — 31.4*7.3cm, 148.4g
- SP-W01-04 Griddle Scraper Turner — 26.6*11.9cm, 158.8g
- SP-W01-05 Flat Griddle Scraper — 15*11.2cm, 158.8g
6-Piece Wood Handle Griddle Tool Set (SP-W01P)
Listed as a six-piece selection with stainless steel blades and polished wooden handles. The stated component sample includes:
- SP-W01P-01 Bigger Griddle Spatula — 33*13 cm, 445 g
- SP-W01P-02 Smaller Griddle scraper — 28.5*7.5cm, 243 g
- SP-W01P-03 Griddle scraper — 30.5*9.5cm, 295 g
The product page advises comparing blade width, working length, handle finish, and included scraper shapes when deciding between SP-W01P and SP-W01. A wider scraper and a long turner serve different tasks, so approve the exact combination rather than assuming the sixth piece is the only difference.
Where PP Handles Fit in the Comparison
If your range also needs a non-wood handle option, the PP Handle Long and Slotted Spatulas listing (SP-PP05) is described as long stainless steel turner and slotted blade options with PP handles. The page states buyers can compare a solid support surface with a slotted profile in the same handle family, and it lists a turner at 38 × 7.5 cm and a slotted scraper at 34 × 7.6 cm.
The component table shows SP-PP05-014 spatula Turner at 38 x 7.5 cm and 194.6 g, and SP-PP05-022 slotted spatula scraper at 34 x 7.6 cm and 183.8 g. The FAQ section explains that a solid blade provides a continuous support surface, while slots allow some liquid to drain — a useful way to frame the solid-versus-slotted choice for your buyers.
Build a Quote Request Buyers Can Answer
The category page explains that some SP-series photographs show a family of shapes rather than one fixed-piece kit, and it advises buyers to identify the blade profile, component reference, overall length, and handle material in the request. It also suggests asking for a drawing matched to the photograph, especially where several lengths share a model family.
Across the three product pages, the listed terms are consistent in structure: a listed minimum order of 1,000 pcs and a listed production lead time of 35–45 days, with a listed threshold of 2,000 pieces for logo and custom-packaging requests. Each page tells buyers to confirm whether the quantity is measured per individual tool or per complete set, and to confirm current terms for the exact component or set. Treat those numbers as model-page listed figures to verify — not as fixed commitments that apply to every order.
A practical quotation brief can include:
- Model reference (for example SP-W01, SP-W01P, or SP-PP05).
- Exact component codes or reference image of the blade shapes you want.
- Quantity and whether the order unit is per tool or per set.
- Handle material and finish (wood or PP as listed).
- Packing format, logo artwork, and private-label requirements.
- Destination and required delivery date.
- A request for the dimensioned drawing, sample, and current terms.
For related tools, you can review the broader griddle, icing spatula, and scraper category to compare turning blades, straight and offset palette knives, and bench scrapers before finalizing a range.
Sample and Approval Checks
The product pages recommend obtaining a sample of the exact configuration and approving the final packing list before bulk production. When the sample arrives, measure the usable blade length and overall length separately, confirm the handle finish, and check that the component set matches the approved drawing. Because some listings share model families, an approved drawing is the safest way to keep sampling and bulk-order comparisons consistent.
For a wood-handle option, the SP-W01 five-piece set lists its five component references; the SP-W01P six-piece set page advises comparing blade width, working length, and included scraper shapes; and the SP-PP05 PP-handle listing covers long turner and slotted scraper profiles. Decide the exact mix first, then request the quote against those component codes.