An icing spreader tool is easiest to source when you stop treating the catalog photo as a single product. The Juneshing griddle and icing spatula category lists PP-handle ranges that share stainless steel blades and PP handles, but each model reference covers different blade geometry and different listed components. This guide helps B2B buyers turn a broad icing spreader tool brief into a quote-ready specification using only the attributes published on the current product pages.
Start With the Working Task, Not the Model Number
The category page separates tasks clearly. Griddle turners are selected for lifting and turning food, while icing spatulas have palette-knife profiles for spreading and smoothing. A scraper or griddle turner serves a different task from an icing blade. Before comparing PP-handle models, decide whether the SKU you are buying is for spreading icing across a cake, working near an edge, or gathering material on a preparation surface.
For icing work specifically, the three PP-handle ranges offer distinct formats:
- SP-PP01 — offset blade format, described as a clear option to compare with straight palette knives. The range includes an angled icing spatula and scraper profiles.
- SP-PP02 — angled icing and scraper options. The listed note explains that an angled icing blade helps the user work across a cake surface while holding the handle above the working area.
- SP-PP03 — straight icing spatulas and scraper profiles. A straight blade follows the handle line, while an offset blade steps below it, so the working angle differs.
If your assortment needs more than icing tools, the broader griddle and icing spatulas category also lists griddle turner sets, wood-handle options and bench scrapers, which belong to different working tasks.
Compare the Listed Model Attributes Side by Side
Only the published component data is safe to use in a brief. The table below copies the listed model reference, product type, selection and the dimensioned icing component from each product page. It does not add capacity, performance or compatibility claims.
| Model reference | Product type | Selection | Listed icing component |
|---|---|---|---|
| SP-PP01 | Offset icing spatula, PP handle | Angled icing spatula and scraper profiles | SP-PP01-006: 25 × 2.5 cm, 61 g |
| SP-PP02 | Angled icing spatula, PP handle | Angled icing and scraper blade options | SP-PP02-008: 29.5 × 3.6 cm, 61 g |
| SP-PP03 | Straight icing spatula, PP handle | Straight icing spatula and scraper options | SP-PP03-004: 35 × 3.3 cm, 119.7 g |
All three share the same listed material and finish: stainless steel blades with PP handles. Weight and size differ, so the retail pack and shipping calculation will differ too. The product pages also list scraper components, such as SP-PP01-019 at 24.3 × 10 cm and 118.2 g, SP-PP01-021 at 28.4 × 8.3 cm and 79 g, and SP-PP03-017 at 33.3 × 7.7 cm and 197.4 g. Confirm the approved drawing for whichever components you select.
One important overlap check: several SP-series photographs show a family of shapes rather than one fixed-piece kit. The SP-PP01 and SP-PP02 pages both warn that the image presents multiple options. Do not assume every pictured blade is included in one set. Request a selected component list and quantity for the model you are quoting.
Build a Quote-Ready Component Brief
The most common sourcing error is sending a model number alone. Each PP-handle range contains multiple shapes, and the listed dimension applies to a named component, not automatically to the whole family. A workable brief names the model reference, the exact component code or reference photograph, the required quantity, the packing format and the destination.
Use this sequence before requesting pricing:
- Decide the blade format: offset (SP-PP01), angled (SP-PP02) or straight (SP-PP03).
- Pick the component reference and confirm whether you need that component alone or a selected assortment.
- Confirm both usable blade length and overall length from a dimensioned drawing, since the listed size may describe the component rather than the complete tool in every interpretation.
- State the handle material family and any finish requirement for the particular model.
- Attach the reference image when several blade or handle options exist.
The individual pages make the component-first approach explicit. SP-PP02 asks buyers to request a selected component list rather than assume the pictured range is one set. SP-PP03 asks buyers to select by blade geometry and usable reach, then confirm the exact component code with a sample. The category page adds that because several lengths share a model family, a drawing matched to the photograph keeps sampling and bulk-order comparisons consistent.
Icing Spreader Tool Wholesale Quote Requirements
Once the component is fixed, the commercial questions become straightforward. Juneshing lists a minimum order of 1,000 pcs for SP-PP01, SP-PP02 and SP-PP03, and a production lead time of 35–45 days for each. The pages instruct buyers to confirm whether that quantity is measured per individual tool or per complete set, and to confirm the current production schedule. Treat those as questions to resolve in the quotation, not as settled assumptions.
Logo and custom packaging have their own listed threshold: 2,000 pieces. The product pages direct buyers to discuss artwork position, finish, packaging layout and the order unit before approving a private-label project. Samples and packaging options are described as available for discussion, with current sample cost, freight, logo options and packaging MOQ to be confirmed for the selected configuration.
A complete request to the sales team should therefore include:
- Model reference and selected component codes
- Quantity, plus confirmation of the order unit
- Packing or logo requirements
- Destination and required delivery date
- Reference image if choosing among several blade or handle options
Before bulk production, obtain a sample of the exact configuration and approve the final packing list. Confirm the approved drawing and the component dimensions and weights you intend to use.
Model Pages to Review Before Quoting
Each range has its own specification table and FAQ. Review the model page that matches your intended blade format, then compare it with the alternative format if your assortment may carry more than one angle.
- PP Handle Offset Icing Spatulas SP-PP01 for the offset blade format and its angled icing and scraper profiles.
- PP Handle Angled Icing Spatulas SP-PP02 for angled icing and scraper blade options, including the 29.5 × 3.6 cm listed component.
- PP Handle Straight Icing Spatulas SP-PP03 for straight icing and scraper options, including the 35 × 3.3 cm listed component.
Keeping the brief anchored to these published attributes keeps sampling and bulk-order comparisons consistent, and it gives the supplier a defined component to quote instead of a generic icing spreader tool request.