An icing spatula set is not a single fixed product on every supplier page. On the Juneshing catalog, the PP-handle lines are presented as ranges with multiple components, so your first buying decision is not “which set” but “which blade profile, size, and order unit.” This guide helps B2B buyers resolve that decision with an evidence-based sample inspection checklist, then brief a supplier for a wholesale quote.
Start with the task, not the set label
An icing spatula, sometimes called a frosting spatula or palette knife, is selected by working length and blade angle. The category page notes that an offset blade gives cake-decorating buyers a clear option to compare with straight palette knives. A straight palette-knife format provides a different working angle from an offset icing spatula.
A scraper or griddle turner serves a different task from an icing blade. If your assortment mix includes bench scrapers for dough dividing or surface clearing, keep those components in a separate line in your brief so the quote stays comparable.
Use a component-level sample inspection checklist
Because the SP-series photographs can show a family of shapes rather than one fixed-piece kit, treat each item as a component. The catalog advises identifying the blade profile, component reference, overall length, and handle material in your request, and asking for a drawing matched to the photograph. This keeps sampling and bulk-order comparisons consistent.
- Confirm the model and component code. State the model reference and the exact component you want, not just the set family name.
- Check listed dimensions against your drawing. The catalog lists dimensions for specific components; confirm both blade and overall measurements for the selected component, and request a dimensioned drawing showing usable blade length, overall length, and handle dimensions before approval.
- Confirm handle material. The PP-handle lines list stainless steel blades with PP handles. Wooden handle families also appear in the catalog, so material finish must be confirmed for the particular model and component.
- Confirm whether the order unit is per tool or per set. The listed minimum order of 1,000 pcs appears on the PP model pages with the instruction to confirm whether it is quoted per tool or per set.
- Confirm the packing list. Ask for the approved drawing and packing list before production.
- Sample the exact configuration. Obtain a sample of the exact configuration you intend to buy, not a representative image from the range.
Compare current PP-handle icing components
The table below summarizes only the listed attributes on the current product pages. Dimensions and weights are component-specific; page images may show more shapes than one code covers.
| Model reference | Icing component and listed size | Listed weight | Other listed components |
|---|---|---|---|
| SP-PP01 | Angled icing component SP-PP01-006: 25 × 2.5 cm | 61 g | Spatula scraper SP-PP01-019: 24.3 × 10 cm, 118.2 g; fish spatula scraper SP-PP01-021: 28.4 × 8.3 cm, 79 g |
| SP-PP02 | Angled icing component SP-PP02-008: 29.5 × 3.6 cm | 61 g | Angled icing and scraper blade options |
| SP-PP03 | Straight icing component SP-PP03-004: 35 × 3.3 cm | 119.7 g | Spatula scraper SP-PP03-017: 33.3 × 7.7 cm, 197.4 g |
All three model pages describe stainless steel blades with PP handles and list 1,000 pcs minimum orders and 35–45-day production lead times, with instructions to confirm current terms for the exact component or set. Logo and custom-packaging requests are listed at a 2,000-piece threshold on these PP model pages.
Prepare a quotation brief that avoids rework
A useful quote request should identify the exact model and component selection, quantities, packing format, and destination. The product pages ask buyers to include model reference, selected pieces, quantity, packing or logo requirements, destination, and required delivery date, plus a reference image when choosing among several blade or handle options.
- List each component code separately instead of writing “one icing set.”
- State whether quantities are ordered per tool or per assembled set, then ask the supplier to confirm the same unit back to you.
- Attach the dimensioned drawing or component reference so sampling matches the photograph.
- Note logo artwork position, finish, and packaging layout before approving a private-label project.
- Ask for current sample cost, freight, logo options, and packaging MOQ for your selected configuration.
Where these tools fit in your range
Juneshing describes itself as a trading and manufacturing company specialized in grill/BBQ tools and kitchenware products mainly including spatulas, kitchen knives, and similar items. The griddle and icing spatula category also lists wood-handle icing spatulas, griddle turners, and bench scrapers, which can help you plan a coordinated assortment rather than a single-SKU purchase.
For PP-handle comparisons, review the SP-PP01 offset icing spatula page alongside SP-PP02 and SP-PP03 before you request pricing. If your brief spans multiple handle materials or scraper profiles, keep the model numbers visible in every email so sampling and quotation stay aligned. A sample inspection checklist is most valuable when it ends with a signed drawing, a confirmed order unit, and a packing list that matches what you approved — not when it ends with a screenshot from a range photo.