A grey spatula is a colour-led request, and colour is exactly the kind of detail that product records often leave out. The current Juneshing catalog confirms handle materials and blade profiles, but no source record states that any spatula component is grey. That does not make a grey spatula impossible; it means the colour must be confirmed in writing before you build it into a specification. This guide explains what the catalog does support, and which checks belong to you as the buyer.
What the current records actually confirm
The griddle, icing spatula and scraper category lists twelve results, covering stainless steel griddle spatulas, cake icing spatulas and bench scrapers. The category text describes two handle families plainly: PP handles and wooden handles. That is a material statement, not a colour statement.
The PP Handle Offset Icing Spatulas | SP-PP01 page is the closest match to a colour-handle discussion, because PP — polypropylene — is a plastic that is commonly produced in a range of colours. Even so, the SP-PP01 specification states only “Stainless steel blades with PP handles.” No grey handle, grey blade, or grey finish is listed anywhere on that record.
So the honest position is this: PP handle tooling exists in the catalog, and grey is a plausible PP colour, but plausible is not confirmed. Treat grey as an open enquiry, not a catalog fact.
Why “grey spatula” is an ambiguous search term
Grey can refer to at least three different parts of a tool, and each one is a different manufacturing question:
- The handle. A moulded PP or wooden handle in a grey tone.
- The blade or head. Bare stainless steel is naturally metallic grey, so some shoppers may simply mean a standard steel blade.
- A coating or finish. Any applied or surface colour treatment, which is a separate finish specification.
Because the catalog does not attach colour names to components, a supplier cannot know which of these you mean from the phrase alone. Being specific in your request prevents a quotation for the wrong component.
Buyer checks before you specify a grey spatula
Use these checks to turn a colour preference into an orderable line item:
- Name the component, not just the colour. State whether grey applies to the handle, the blade or the whole tool.
- Cite the model reference. For an offset icing tool, SP-PP01 is the relevant range. Confirm whether you want a single component or a selected assortment.
- Ask whether colour is part of the specification at all. If the record does not list colour, ask the team to confirm which colours are actually available for the selected material.
- Request a colour reference. Ask for a physical sample or an approved colour swatch rather than relying on a screen image, since monitors render grey differently.
- Confirm the order unit. Component-level records and set-level records are not interchangeable, and the listed minimum is stated as 1,000 pcs — stated in the source as needing confirmation on whether it is measured per tool or per set.
- Check the finishing route. Logo and custom-packaging requests are listed at a 2,000-piece threshold, but colour is a separate question from branding and should be confirmed on its own.
Listed dimensions you can compare against
Colour is not the only variable. The SP-PP01 record lists three components with sizes and weights, which gives you something concrete to match against a drawing:
| Component | Tool | Listed size | Listed weight |
|---|---|---|---|
| SP-PP01-006 | Angled icing spatula | 25 × 2.5 cm | 61 g |
| SP-PP01-019 | Spatula scraper | 24.3 × 10 cm | 118.2 g |
| SP-PP01-021 | Fish spatula scraper | 28.4 × 8.3 cm | 79 g |
Two cautions apply. First, confirm whether listed dimensions describe the blade or the whole tool — the category page explicitly advises requesting a dimensioned drawing so blade length, overall length and handle dimensions are clear. Second, the primary image for SP-PP01 shows a range of shapes rather than a confirmed fixed-piece kit, so pick by component code and size rather than by the picture.
What remains unknown
To be direct about the evidence boundary: no source states that a grey spatula is sold, that grey is an available PP colour, or that colour customisation is offered for any specific component. Nothing in the records supports a claim about grey durability, grey-specific materials, or any colour-matching service.
Those gaps are not obstacles — they are the questions. A supplier who can answer them in writing, with a sample attached, gives you something to approve. A supplier who assumes an answer does not.
Frequently asked questions
Does Juneshing sell a grey spatula?
No fetched source states this. The SP-PP01 record lists stainless steel blades with PP handles and gives no colour for any component, so the grey colour cannot be confirmed from the available evidence. Ask the team directly before treating grey as an available option.
Are PP handles available in different colours?
The catalog confirms PP handles exist as a handle family, and the category page notes that material, finish and available customisation must be confirmed for the particular model and component. It does not list the colour range, so confirm the actual colours offered for your selected component rather than assuming.
How do I phrase a colour enquiry that gets a useful reply?
Combine model, component, colour, quantity and destination. For example: SP-PP01, component SP-PP01-006, grey handle if available, requested quantity, and delivery market. Add your packing or logo brief separately, since branding thresholds and colour availability are different questions.
Should I approve the final sample before bulk production?
Yes. The product record itself advises obtaining a sample of the exact configuration and approving the final packing list before bulk production. Where colour is the deciding factor, that sample is the only reliable confirmation.