A flexible griddle spatula is easiest to buy when you treat it as a defined component, not a vague category. The term is usually used for a flat-top turning tool whose blade or working profile suits lifting, turning and scraping across a flat cooking surface. This guide turns that intent into a buyer-side specification checklist you can send with a request for quotation.
Use the griddle spatulas, icing spatulas and scrapers category to compare current models and blade families before you shortlist.
Checklist: what to specify before requesting a quote
A flexible griddle spatula brief should remove ambiguity. The category page notes that a griddle spatula supports food while turning or lifting it from a flat cooking surface, and that buyers should compare long blades, broad turners and slotted profiles by the food being handled. Build your specification around the following points:
- Blade profile: long, slotted, scraper, scraper turner or broad turner.
- Blade and overall size: confirm both measurements for the selected component.
- Handle material and finish: wood or PP handle families appear in the catalog; confirm the exact model.
- Component reference: cite the component code, not only the set model.
- Order unit: ask whether the minimum is measured per individual tool or per complete set.
- Packaging and logo: state artwork position, packing format and destination.
- Surface compatibility: check the cooking-surface manufacturer’s utensil guidance before specifying metal utensils for coated cookware.
Compare only verifiable model attributes
The tables below summarize what is explicitly listed on the current Juneshing pages. They are a starting point for a written specification, not a substitute for an approved drawing.
| Model | Product type listed | Material and finish listed | Selection listed | Listed minimum / lead time |
|---|---|---|---|---|
| SP-W01 | Wood handle griddle spatula set | Stainless steel blades with wooden handles | Five turning and scraping tools | 1,000 pcs; 35–45 days |
| SP-W01P | 6 piece griddle tool set | Stainless steel blades with polished wooden handles | Six griddle spatula and scraper profiles | 1,000 pcs; 35–45 days |
| SP-PP05 | Long stainless steel spatula PP handle | Stainless steel blades with PP handles | Long turner and slotted scraper profiles | 1,000 pcs; 35–45 days |
For each model, the sources list minimum orders of 1,000 pcs and 35–45-day production lead times, but the pages also ask buyers to confirm the order unit and current schedule. Treat those figures as items to verify in the current quotation.
SP-W01 listed component entries
The 5-piece wood handle griddle spatula set SP-W01 page lists five component entries:
- SP-W01-01 Griddle Long Spatula: 37 × 7.3 cm, 188.6 g
- SP-W01-02 Griddle Slotted Spatula: 31.4 × 7.3 cm, 149.8 g
- SP-W01-03 Griddle Scraper spatula: 31.4 × 7.3 cm, 148.4 g
- SP-W01-04 Griddle Scraper Turner: 26.6 × 11.9 cm, 158.8 g
- SP-W01-05 Flat Griddle Scraper: 15 × 11.2 cm, 158.8 g
The same page states a listed threshold of 2,000 pieces for logo and custom-packaging requests. Confirm artwork position, finish, packaging layout and the order unit before approving a private-label project.
SP-W01P listed component entries
The 6-piece wood handle griddle tool set SP-W01P page describes a six-piece selection, but only three component entries are shown in the specification table:
- SP-W01P-01 Bigger Griddle Spatula: 33 × 13 cm, 445 g
- SP-W01P-02 Smaller Griddle scraper: 28.5 × 7.5 cm, 243 g
- SP-W01P-03 Griddle scraper: 30.5 × 9.5 cm, 295 g
Because the page says six profiles while listing three entries, ask for the full component list and a dimensioned drawing before you approve packaging or set composition.
SP-PP05 listed component entries
The PP handle long and slotted spatulas SP-PP05 page lists two component entries:
- SP-PP05-014 spatula Turner: 38 × 7.5 cm, 194.6 g
- SP-PP05-022 slotted spatula scraper: 34 × 7.6 cm, 183.8 g
The page notes that a solid blade provides a continuous support surface while slots allow some liquid to drain. Confirm which profile belongs in your order before comparing quotations.
Quotation and sample checks
A written request helps a supplier reply with a relevant quotation. The product pages suggest sending the model reference, selected pieces, quantity, packing or logo requirements, destination and required delivery date. Add a reference image if you are choosing among several blade or handle options.
When comparing quotations for a flexible griddle spatula program, check:
- Model and component codes: SP-W01, SP-W01P and SP-PP05 are set or range references that may not describe every component in the same way.
- Order unit: ask whether the 1,000 pcs minimum applies per tool or per set.
- Production schedule: the listed 35–45-day lead time should be confirmed as current.
- Logo and packaging threshold: the listed 2,000-piece threshold for logo and custom packaging should be confirmed for the exact configuration.
- Drawings: request an approved drawing and packing list before bulk production.
- Sample: obtain a sample of the exact configuration and approve it before bulk production.
- Packaging prep: for bench scrapers, the category page advises confirming blade dimensions and scale units before designing packaging.
These are buyer checks, not a claim that any particular term has already been agreed. The final quotation and approved documents should carry the specification.
A practical shortlist step
For a flexible griddle spatula assortment, start by naming the food-handling tasks: turning, lifting, scraping or draining. Match those tasks to long, slotted, scraper or broad profiles, then choose the handle family. The category page shows both wooden and PP handle families, and the model pages differ in listed component sizes and weights.
Once the shortlist is fixed, send one brief per model with component codes, order unit assumption, packaging brief and destination. That keeps sampling and bulk-order comparisons consistent, and it gives the supplier a clear basis for a quotation. Related cooking ranges such as griddle and icing spatulas can be reviewed alongside the selected models if you need a broader assortment.
Bottom line: Approve the exact blade profile, component code, drawing, order unit, sample and packing list before you treat any flexible griddle spatula quotation as final.