A flat icing spatula is a palette-knife style tool used to spread, smooth or shape icing and frosting on baked goods. For wholesale buyers, the sourcing decision usually comes down to three things: the blade geometry, the exact component reference, and the documentation that travels with the sample and quotation. This guide works through those checks using the currently published Juneshing catalog pages.
Start With the Job, Not the Handle
The catalog groups flat icing blades together with griddle turners and scrapers, so the first buyer task is separating tools by function. As the category page notes, a griddle turner is selected for lifting and turning food, while an icing spatula has a palette-knife profile for spreading and smoothing. The shared word “spatula” should not blur that distinction in a purchase brief.
Within the icing family, blade angle is the main differentiator:
- Offset blades step below the handle line, which the SP-PP01 page describes as giving cake-decorating buyers a clear option to compare with straight palette knives.
- Angled blades let the user work across a cake surface while holding the handle above the working area, as described on the SP-PP02 page.
- Straight blades follow the handle line, giving a different working angle from an offset icing spatula, per the SP-PP03 page.
A flat icing spatula brief should state which of these working angles the finished assortment needs, then use the component code to lock the choice.
Flat Icing Spatula Models Published by Juneshing
The PP-handle family is the most directly comparable set of published models. Only the attributes explicitly listed on each live product page are reproduced below.
| Model | Product type | Listed icing component | Listed size | Listed weight |
|---|---|---|---|---|
| SP-PP01 | Offset icing spatula, PP handle | SP-PP01-006, angled icing spatula | 25 × 2.5 cm | 61 g |
| SP-PP02 | Angled icing spatula, PP handle | SP-PP02-008, angled icing spatula | 29.5 × 3.6 cm | 61 g |
| SP-PP03 | Straight icing spatula, PP handle | SP-PP03-004, straight icing spatula | 35 × 3.3 cm | 119.7 g |
All three pages list stainless steel blades with PP handles. Each page also states that the icing component dimension must be confirmed against an approved drawing, and each asks buyers to confirm the blade and handle dimensions separately where those measurements determine the retail pack.
A critical overlap point: the SP-PP01 page states the primary image presents a range of shapes rather than a confirmed fixed-piece kit. The SP-PP02 page makes the same warning about its displayed range. Do not assume that every blade pictured on a model page is included in one set. Identify the component code and size for each requested item.
Sample Inspection Checks for a Flat Icing Spatula
Use a written sample inspection checklist so that the physical sample, the drawing and the purchase order describe the same object. The following checks are all grounded in what the product pages themselves instruct buyers to confirm.
- Component code match. Confirm the sample label carries the exact reference, such as SP-PP01-006, SP-PP02-008 or SP-PP03-004, and that it matches the quotation line.
- Drawing match. Ask for a dimensioned drawing matched to the photograph and compare it with the sample. The category page recommends this specifically where several lengths share a model family.
- Blade versus overall length. The pages distinguish the icing component size from the whole tool. Confirm both measurements, plus handle dimensions, before approval.
- Handle material and finish. The catalog includes wood-handle and PP-handle families. The material, finish and available customization must be confirmed for the particular model and component.
- Working angle. Verify the sample is offset, angled or straight as specified, since this is the feature the buyer is selecting.
- Packing list alignment. The product pages advise approving the final packing list before bulk production.
Where a range photograph shows multiple tools, request a selected component list and quantity as the SP-PP02 page suggests, rather than treating the image as a bill of materials.
Quotation and Order-Term Checks
The published pages give buyers several terms that should be re-confirmed rather than assumed for a new order. The listed minimum order on SP-PP01, SP-PP02 and SP-PP03 is 1,000 pcs, and each page asks the buyer to confirm whether that quantity is measured per individual tool or per complete set. The listed production lead time is 35–45 days, with a note to confirm the current schedule. The listed threshold for logo and custom-packaging requests is 2,000 pieces.
These are the buyer checks to build into a quotation request:
- Exact model reference and selected component codes.
- Quantity and the stated order unit (per tool or per set).
- Packing format, and logo or custom-packaging requirements.
- Destination.
- Required delivery date.
- A reference image where several blade or handle options are in play.
Samples and packaging options are described as available for discussion. Ask for current sample cost, freight, logo options and packaging MOQ for your selected configuration.
Where to Compare Before You Order
Review the full griddle and icing spatulas category to see turning blades, straight and offset palette knives, PP handles and wooden handles side by side, then request a quotation for the exact tool shape and model. For the most direct PP-handle comparisons, start with the PP Handle Offset Icing Spatulas SP-PP01 and the PP Handle Straight Icing Spatulas SP-PP03 pages, which bracket the offset-versus-straight decision.
Juneshing describes itself as a trading and manufacturing company specialized in grill and BBQ tools and kitchenware products, mainly including spatulas and kitchen knives. Use the model references above to discuss a defined product brief with the team, and keep every specification tied to the approved drawing and packing list rather than to a photograph.