A dough scraper wooden handle combines a broad stainless steel blade with a wood grip. For wholesale buyers, the tool sits at the intersection of baking prep, dough portioning and counter tidying, so a single model can serve several product categories. This guide focuses on the Wood Handle Dough and Bench Scraper GC-W01A and on the checks that reduce returns, rework and quotation delays. Treat every listed figure as a starting point to confirm rather than a final commitment.
What a wood-handle dough scraper is used for
The GC-W01A is described as a broad rectangular stainless steel blade with a wooden handle. Its bench-scraper format suits dough portioning, ingredient transfer and tidying a compatible preparation surface. That combination matters when you build a baking assortment: the same tool may be positioned as a dough cutter, a counter scraper or a prep companion.
Because the tool touches dough and worktops, buyers should confirm two practical points before committing to a range: the intended preparation surface and the end customer’s actual task. Confirm suitability for the worktop or cookware surface the end customer will use, since a blade that is fine on one surface may not suit another.
Compare the blade, handle and format
Selection should start with the physical tool, not the marketing name. The GC-W01A is listed with a rectangular scraper and dough portioning blade, a stainless steel blade and a wooden handle. The listed dimensions are 162 × 117 mm, and the page advises confirming the approved drawing.
Buyers can compare this wood-handle dough scraper with the PP-handle measuring-scale model when building a baking assortment. The measuring-scale alternative, Stainless Steel Bench Scraper with Scale GC-P02, serves a different task: it carries a scale, while the GC-W01A is the wood-handle dough and bench scraper. Comparing the two helps you decide whether your assortment needs measurement, portioning, or a mix of both.
Two physical checks should be part of any sample review:
- Blade edge finish, so the tool performs the intended scraping and portioning task.
- Handle attachment, so the wood grip stays secure in use.
The catalog also shows other handle families in the same product group, including PP-handle turners and scrapers. Confirm the blade profile, component reference, overall length and handle material in every request, especially where several lengths share a model family. This keeps sampling and bulk-order comparisons consistent.
Specification and quotation checklist
A quotation comparison is only useful when each line item describes the same configuration. Use the model reference GC-W01A and state the selected pieces, quantity, packing or logo requirements, destination and required delivery date. Adding a reference image helps if you are choosing among several blade or handle options.
The product page lists several figures that should be confirmed in writing before you approve a purchase order:
| Item | Listed detail | Buyer action |
|---|---|---|
| Model | GC-W01A | Use the model reference in every request |
| Blade and handle | Stainless steel blade with wooden handle | Confirm finish and handle attachment on a sample |
| Selection | Rectangular scraper and dough portioning blade | Match the blade to the intended task |
| Dimensions | 162 × 117 mm | Confirm the approved drawing and packaging allowance |
| Minimum order | 1,000 pcs | Confirm whether the quantity is per tool or per set |
| Production lead time | 35–45 days | Confirm the current schedule before committing |
| Logo and packaging | 2,000 pieces | Confirm order unit and artwork before approval |
These are listed specifications, not guarantees. Ask the sales team to confirm the order unit, the exact configuration and the current minimum in your quotation, along with the current production schedule. Your quotation should identify the exact component selection, packing format and destination.
Samples, logo and packaging approval
Samples and packaging options are available for discussion. Ask for the current sample cost, freight, logo options and packaging MOQ for your selected configuration. The listed threshold for logo and custom-packaging requests is 2,000 pieces.
Before bulk production, discuss artwork position, finish, packaging layout and the order unit. Obtain a sample of the exact configuration and approve the final packing list. This single step prevents most mismatches between a photograph, a quotation and the delivered tool.
When you are ready to discuss a defined brief, send the model reference and purchasing brief through the contact page. You can also browse the griddle and icing spatula collection to compare related options, or review the GC-W01A product page for the current listed details.
Frequently asked questions
What dimensions are listed for GC-W01A?
The product specification lists 162 × 117 mm for GC-W01A. Confirm the final drawing and packaging allowance with the approved sample before ordering.
What is the minimum order for GC-W01A?
The listed minimum is 1,000 pcs. Confirm the order unit, the exact configuration and the current minimum in your quotation, because the quantity may be measured per tool or per set.
Can I request a sample and custom packaging?
Samples and packaging options are available for discussion. Ask for current sample cost, freight, logo options and packaging MOQ for your selected configuration.
What should I send to obtain a GC-W01A price?
Include model GC-W01A, selected pieces, quantity, packing or logo requirements, destination and required delivery date. Add the reference image if you are choosing from several blade or handle options.
Key buyer takeaways
A dough scraper wooden handle is a task-specific tool, not a generic utensil. Match the blade to the job, confirm the handle attachment in a sample, and treat every listed dimension, minimum and lead time as a figure to verify rather than a fixed promise. Keeping the model reference, order unit and packaging brief consistent from quotation through inspection gives your team a cleaner comparison and a lower risk of rework.