The query “cheese tool component codes for gift box dimension approval” describes a specific purchasing step: reading the reference codes on a cheese tool set specification, matching each code to its listed size, and using that information when you plan presentation or gift-box packaging. Juneshing lists component-level measurements for selected cheese tool sets, which lets buyers talk about individual pieces rather than a vague “set.”
What component codes tell you in a cheese tool set
Once a set has a component list, things change on the buyer side, because you stop guessing what a product picture contains and start working through names and measurements item by item. That process is what makes a gift-box brief practical rather than cosmetic.
How to read Juneshing component codes
A component code is a reference built from the parent model plus a sequence number. On the CK-W02R page, the components appear as CK-W02R-01 through CK-W02R-04. On the CK-P01 page, the same pattern appears as CK-P01-01 through CK-P01-04. Each code is tied to a named tool, a listed size and a listed weight.
This matters because a picture of four tools does not tell you which piece is which. The code does. It gives you a short label you can quote in an email, place on an approval sheet, or use when asking for a current drawing.
Listed measurements for CK-W02R components
The CK-W02R listing describes stainless steel blades with wooden handles and four illustrated cheese tools, including a cheese plane. The component reference shows:
| Reference | Tool | Listed size | Listed weight |
|---|---|---|---|
| CK-W02R-01 | Cheese slicer knife | 153*19mm | 17 g |
| CK-W02R-02 | Cheese peeler | 145*55mm | 19 g |
| CK-W02R-03 | Cheese knife | 155*22mm | 15 g |
| CK-W02R-04 | Cheese slicer knife | 156*22mm | 17 g |
These are listed component dimensions and weights, not a packing specification. They describe individual tools, not a finished box. Treat them as reference points and confirm the final packing list before approving the order.
Listed measurements for CK-P01 components
The CK-P01 listing describes stainless steel blades with colorful PP handles and four cheese tools with different blade profiles. Its component reference shows:
| Reference | Tool | Listed size | Listed weight |
|---|---|---|---|
| CK-P01-01 | Cheese knife | 129*23mm | 30.4 g |
| CK-P01-02 | Cheese scraper | 122*47mm | 42.4 g |
| CK-P01-03 | Cheese knife with hole | 138*20 mm | 27.4 g |
| CK-P01-04 | Cheese fork | 127*33mm | 35.2 g |
Comparing the two tables also shows why component codes matter for an assortment brief: CK-P01-02 is a cheese scraper, while CK-W02R-02 is a cheese peeler. The same slot number does not mean the same tool. The parent model reference controls the meaning of the code.
Why component codes help gift-box dimension approval
Approving a gift box means deciding what will sit inside it. A component code gives you a named item to place in that discussion, and the listed size gives you a starting point. It is easier to say “CK-P01-02, listed 122*47mm” than to describe a broad scraper in general terms.
However, current drawings must be obtained before designing box inserts. The listed measurements on a product page describe the tool reference, not the exact profile of a finished unit, the handle thickness at the grip, or the approved packing format. Ask the sales team for the approved drawing and packing list covering the exact configuration you intend to order.
Questions to attach to each component code
- Which component code does the current drawing cover?
- Does the listed size refer to the tool as drawn or to a sub-component?
- Does the approved packing list match the codes in your brief?
- Are the handle colours or finishes you requested covered by the same approval?
What the source does not confirm
The listings do not provide box sizes, insert dimensions, cavity layouts or packaging drawings. None of that should be assumed from a component table. Information on sample cost, freight, logo options and packaging minimum order also needs to be requested and confirmed.
Confirming commercial and configuration details
Both CK-W02R and CK-P01 pages list a minimum order of 1,000 pcs and a production lead time of 35–45 days. The pages then ask buyers to confirm whether the quantity is measured per individual tool or per complete set, and to confirm the current production schedule. Those qualifications matter for a gift-box project, because box planning depends on knowing how many sets, and therefore how many of each component code, are in scope.
Both pages also list a threshold of 2,000 pieces for logo and custom-packaging requests. Artwork position, finish, packaging layout and the order unit should be discussed before a private-label project is approved.
Handles differ between the two references: CK-W02R uses wooden handles, while CK-P01 uses colorful PP handles. The CK-P01 page advises sending required colour references with the inquiry and notes that colour matching, available options and minimum quantities need confirmation before a custom order is accepted. Colour matching should therefore be treated as something to confirm, not as something already settled.
To plan gift-box dimensions around component codes, sample the exact configuration and approve the final packing list before bulk production. You can review the full range through the cheese knife sets and serving tools category page, and compare the two referenced products at CK-W02R and CK-P01.
Sample approval checklist for a coded set
- Match each component code on your brief against the current product page.
- Request the approved drawing for every code in the final configuration.
- Ask whether the listed size and weight describe the tool as drawn.
- Ask for the approved packing list and confirm it lists the exact components.
- Confirm whether the quoted minimum order unit is per tool or per set.
- Confirm current production timing rather than relying on the listed range.
- Approve a sample of the exact configuration before bulk production.
- Keep the drawing, packing list and sample approval in one record for the box project.
Send your selected model references, component codes, quantities, packaging brief and destination through the contact page so the team can prepare a relevant reply.
Frequently asked questions
What is a cheese tool component code?
It is a reference formed from the parent model plus a sequence number. For example, CK-W02R-01 identifies the cheese slicer knife in the CK-W02R set, and CK-P01-01 identifies the cheese knife in the CK-P01 set. The code ties a specific tool name to its listed size and weight.
Can I use the listed sizes to design a gift box insert?
No. The listed component sizes are reference measurements for the tools, not packaging specifications. Current drawings must be obtained before designing box inserts, and the approved packing list should be confirmed against your component codes first.
Is the minimum order 1,000 pieces for CK-W02R?
The CK-W02R page lists a minimum order of 1,000 pcs, and asks buyers to confirm whether the quantity is measured per individual tool or per complete set. Confirm the order unit, exact configuration and current minimum in your quotation.
Does the same component code number mean the same tool in every set?
No. CK-W02R-02 is a cheese peeler, while CK-P01-02 is a cheese scraper. The parent model reference controls what each code means, so always read the code together with the full model number.
Can I request a sample and custom packaging?
The listings say samples and packaging options are available for discussion. Ask for current sample cost, freight, logo options and packaging minimum order for your selected configuration, then approve the final packing list before bulk production.