A cake spatulas sourcing brief gets easier when you separate the tool shape from the order paperwork. The catalog below covers icing blades, scrapers and griddle turners in one category, but the listed specifications differ by model and component. This guide walks through what the Juneshing pages actually state, so you can compare PP handle options and build a quotation request that names the exact item you want quoted.
Start with the task, then the blade shape
The category page describes an icing spatula, also called a frosting spatula or palette knife, as a tool selected by working length and blade angle. That is the first buyer decision: what the blade must do.
- Offset blade: the format used by PP Handle Offset Icing Spatulas – SP-PP01, described as giving cake-decorating buyers a clear option to compare with straight palette knives.
- Angled blade: SP-PP02 is described as helping the user work across a cake surface while holding the handle above the working area.
- Straight blade: SP-PP03 uses the straight palette-knife format and is described as providing a different working angle from an offset icing spatula.
- Scraper profiles: each PP range also lists scraper or turner profiles, which the category page notes serve a different task from an icing blade.
A practical buyer check is to match the blade geometry to the job, then confirm the exact component code rather than ordering from a family photo. The SP-PP01 page states plainly that its primary image presents a range of shapes rather than a confirmed fixed-piece kit, and the SP-PP02 page makes the same point about its displayed range.
Compare only the listed PP handle attributes
All three PP handle icing spatula pages share the same stated material and finish: stainless steel blades with PP handles. The listed dimensions and weights differ, so the table below reproduces only what each product page lists. Cell values are labeled as listed; confirm an approved drawing before you treat any dimension as final.
| Model | Listed product type | Reference | Listed size | Listed weight |
|---|---|---|---|---|
| SP-PP01 | Offset icing spatula, PP handle | SP-PP01-006 angled icing component | 25 × 2.5 cm | 61 g |
| SP-PP02 | Angled icing spatula, PP handle | SP-PP02-008 angled icing component | 29.5 × 3.6 cm | 61 g |
| SP-PP03 | Straight icing spatula, PP handle | SP-PP03-004 straight icing component | 35 × 3.3 cm | 119.7 g |
Two of the pages also list scraper components: SP-PP01-019 at 24.3 × 10 cm (118.2 g), SP-PP01-021 at 28.4 × 8.3 cm (79 g) and SP-PP03-017 at 33.3 × 7.7 cm (197.4 g). If your retail pack mixes an icing blade with a scraper, the pack size and weight need to account for both components.
Note what the pages do not state. There is no listed coating claim, no blade-thickness figure, no flex rating and no stated edge finish beyond stainless steel. Buyers comparing an icing spatula against other models should avoid assuming shared specifications across the SP-PP family simply because the handles look alike. Ask for the dimensioned drawing and confirm usable blade length, overall length and handle dimensions separately.
Sample and quotation checks for a wholesale brief
Each of the three pages lists the same commercial figures: a minimum order of 1,000 pcs and a production lead time of 35–45 days, plus a listed threshold of 2,000 pieces for logo and custom-packaging requests. Each page also asks buyers to confirm whether the quantity is measured per individual tool or per complete set, and to confirm the current production schedule.
That wording shapes a sensible buyer checklist:
- Name the model and component code. A request for “SP-PP02” is less precise than a request naming SP-PP02-008 plus any scraper components.
- Confirm the order unit. Ask whether the 1,000 pcs minimum applies per tool or per set, then state your quantity against that answer.
- Confirm the delivery-date basis. The listed 35–45 days is a production lead time; ask how it applies to your selected configuration.
- Request the approved drawing and packing list. Both the SP-PP01 and SP-PP03 pages tie dimension confirmation to an approved drawing and packing list before production.
- Approve a sample of the exact configuration. The product pages direct buyers to obtain a sample of the exact configuration rather than approving from a family photo.
- Separate logo and packaging terms. The 2,000-piece threshold is listed as applying to logo and custom-packaging requests; ask for current logo options and packaging MOQ for your selected configuration.
Send model reference, selected pieces, quantity, packing or logo requirements, destination and required delivery date. The pages also suggest adding a reference image when you are choosing among several blade or handle options.
Cover the broader category before you finalize
The Griddle Spatulas, Icing Spatulas & Scrapers category lists 12 results and also shows wood-handle icing ranges, sets and bench scrapers. If your assortment needs more than one handle family, compare PP Handle Offset Icing Spatulas – SP-PP01 and PP Handle Straight Icing Spatulas – SP-PP03 as two distinct blade geometries, then check whether the angled SP-PP02 option fits the same brief. Because several SP-series photographs show a family of shapes rather than one fixed-piece kit, identify component references in writing before sampling and bulk-order comparisons.
Keep procurement claims tied to the source
Treat every figure above as a listed value pending confirmation, not as a guaranteed tolerance. Where the pages say confirm, confirming is the buyer’s step. Ask about current sample cost, freight, logo options and packaging MOQ for your selected configuration, and route the request through Juneshing’s contact page so the reply can address your exact component list.