A cake long spatula is a palette-knife-style icing tool used to spread and smooth frosting on cakes. In wholesale sourcing, the word “long” is a working requirement rather than a single catalog title: Juneshing does not list a SKU named “cake long spatula,” but its icing spatula ranges include multiple blade lengths you can quote against a chosen profile and drawing. This guide explains how to match that requirement to the catalog, distinguish straight from offset blades, and check specifications before ordering.
What “Long” Means for a Cake Spatula
For icing work, usable blade length is the dimension that matters most. A longer blade covers more surface per stroke when smoothing the top or sides of a cake, while a shorter blade gives more control around edges and small areas. Juneshing’s category page describes icing spatulas as selected by working length and blade angle, with palette-knife profiles for spreading and smoothing.
Because “long” is relative, specify the number you need. Ask for a dimensioned drawing showing usable blade length, overall length and handle dimensions before approving a sample. The catalog itself notes that some photographs show a family of shapes rather than one fixed-piece kit, so do not treat a group photo as a single product specification.
Catalog Evidence: Two Wood-Handle Icing Spatula Ranges
Two Juneshing ranges are relevant starting points for a cake long spatula brief. Both use stainless steel blades with wooden handles, and both are listed with a minimum order of 1,000 pcs and a production lead time of 35–45 days, which the pages ask buyers to confirm for the exact component. Neither page states a product named “cake long spatula,” and neither page states a cake weight or dough estimate.
| Model | Blade profile stated on page | What the page shows or states |
|---|---|---|
| SP-W01R | Offset | Stainless steel icing spatula range with wood handles; dimensioned photograph shows 4 offset blade profiles with printed photo dimensions of 36.8 × 4; 34 × 3.2; 32.4 × 3.6; 27.8 × 5 cm |
| SP-W01M | Straight and offset profiles shown | Wood-handle icing spatula range with several blade lengths and working angles; wooden handle specification to confirm |
The SP-W01R page labels the range as offset and treats the printed dimensions as photo references, not newly assigned component SKUs. The SP-W01M page shows both straight and offset palette-knife profiles and asks buyers to request a matching drawing and photograph for the exact profile before ordering. Read the SP-W01R product page and the SP-W01M product page together, but match each claim to its own page.
Straight or Offset: Match the Profile to the Task
The catalog explains the difference plainly: an offset blade has a visible step between the handle and the working blade, while a straight blade follows the handle line. For a long icing blade, the profile affects how the hand sits relative to the cake surface.
- Offset: SP-W01R is described as an offset range. Use its dimensioned photograph to select one of the four offset profiles and confirm the exact drawing.
- Straight or offset: SP-W01M shows both profiles. Specify which one you want and ask for a drawing matched to the selected blade.
- Finish: Both pages state stainless steel blades; the SP-W01M page lists the wooden handle specification as something to confirm.
Do not assume that a length shown for one model or profile applies to another. The pages treat each component selection as its own quotation item.
Buyer Checks Before Requesting a Quote
Procurement advice here is about what to verify, not about capabilities the catalog claims. Include the following in your inquiry so the reply can address the exact tool:
- Model and component: name the model reference (SP-W01R or SP-W01M) and the selected blade profile or reference photograph.
- Dimensions: request a dimensioned drawing showing usable blade length, overall length and handle dimensions for the exact component.
- Quantity unit: the listed minimum is 1,000 pcs, but ask whether that quantity is measured per individual tool or per complete set.
- Schedule: the listed lead time is 35–45 days; confirm the current production schedule for your selection.
- Logo and packaging: the listed threshold is 2,000 pieces for logo and custom-packaging requests; discuss artwork position, finish, packaging layout and the order unit before approving a private-label project.
- Samples: obtain a sample of the exact configuration and approve the final packing list before bulk production.
- Destination and date: state the destination and required delivery date so the quotation is relevant.
These are questions for the supplier, not guarantees. Current terms should be confirmed in your quotation for the exact component or set.
Frequently asked questions
Does Juneshing sell a product called “cake long spatula”?
No product in the fetched catalog carries that exact title. Juneshing lists icing spatula ranges, including the offset SP-W01R range and the SP-W01M range with straight and offset profiles, that can be quoted against a length you specify.
How do I confirm the blade is actually long enough?
Ask for a dimensioned drawing for the exact component. The SP-W01R page prints photo dimensions for four offset profiles, from 27.8 to 36.8 cm in one dimension, and states these are photo references rather than assigned component SKUs. Treat them as a starting point and confirm the usable blade length and overall length you need.
Is the SP-W01R range straight or offset?
The SP-W01R page describes it as an offset range with a visible step between the handle and the working blade. If you need a straight blade, look at the SP-W01M page, which shows straight and offset profiles and asks buyers to confirm the exact profile with a drawing.
What is the minimum order?
Both the SP-W01R and SP-W01M pages list a minimum order of 1,000 pcs. The pages ask buyers to confirm whether the figure is quoted per tool or per set and to confirm the current minimum in the quotation.
What should I send to get a price?
Include the model reference, selected pieces, quantity, packing or logo requirements, destination and required delivery date. Add the reference image when choosing from several blade or handle options. You can send the brief through the spatula category page or the contact page.
Can I request a sample and custom packaging?
Both product pages state that samples and packaging options are available for discussion and ask buyers to confirm current sample cost, freight, logo options and packaging MOQ for the selected configuration. The listed threshold for logo and custom-packaging requests is 2,000 pieces.
Putting the Brief Together
A useful cake long spatula inquiry names the model, the blade profile, the dimensions you need and the quantity unit. Keep the SP-W01R and SP-W01M specifications separate, and use each page’s dimensioned photograph and drawing request process to avoid quoting the wrong component. Where a fact is not stated on the page, record it as unknown and ask rather than assuming.