Buying a cake icing spreader for a wholesale or private-label range starts with one decision: which blade geometry fits the decorating task the tool is meant to serve. The current Juneshing catalog separates PP handle icing spatulas into offset, angled, and straight families, and each family lists its own component references, sizes, and order terms. This guide walks through what buyers can compare from the published product pages and what details should be locked down before sampling or bulk production.
Start with the blade shape, not the handle color
An icing spatula is also called a frosting spatula or palette knife, and the catalog selects it by working length and blade angle. Three PP handle families cover the main profiles:
- Offset — PP Handle Offset Icing Spatulas | SP-PP01 lists an angled icing blade and scraper profiles, with the offset format stepping the blade below the handle line.
- Angled — PP Handle Angled Icing Spatulas | SP-PP02 is positioned for working across a cake surface while holding the handle above the working area.
- Straight — PP Handle Straight Icing Spatulas | SP-PP03 follows the handle line, giving a different working angle from an offset blade.
A scraper or griddle turner serves a different task from an icing blade, so if the assortment includes both, keep those lines separate in the brief. Buyers sourcing for cake-decorating, baking, and kitchen utensil assortments can compare all three families in the Griddle Spatulas, Icing Spatulas & Scrapers category, which also lists related wood-handle and stainless steel options.
Compare the listed PP handle model attributes
The three families publish a specification table per model. The table below reproduces only what those pages state; dimensions are listed for the named component, not for an assumed complete set.
| Model | Product type | Material and finish | Listed icing component size |
|---|---|---|---|
| SP-PP01 | Offset icing spatula, PP handle | Stainless steel blades with PP handles | SP-PP01-006: 25 × 2.5 cm |
| SP-PP02 | Angled icing spatula, PP handle | Stainless steel blades with PP handles | SP-PP02-008: 29.5 × 3.6 cm |
| SP-PP03 | Straight icing spatula, PP handle | Stainless steel blades with PP handles | SP-PP03-004: 35 × 3.3 cm |
SP-PP01 also lists a scraper component at 24.3 × 10 cm and a fish spatula scraper at 28.4 × 8.3 cm. SP-PP03 lists a scraper at 33.3 × 7.7 cm. SP-PP02 lists its icing component only in the specification section. Each page states that its photographs may show a family of shapes rather than one confirmed fixed-piece kit, so the component reference, not the image, defines what is quoted.
Weights are listed per component on the individual pages. SP-PP01-006 and SP-PP02-008 are both listed at 61 g, while SP-PP03-004 is listed at 119.7 g. Confirm these figures against an approved drawing if weight affects freight or retail pack planning.
Sample and quotation checks before committing
The listed minimum order on all three PP handle pages is 1,000 pcs, and the listed production lead time is 35–45 days. Both figures appear with a confirmation note, so treat them as starting points for a quotation conversation rather than fixed terms. Before requesting a quote, ask these buyer-side questions:
- Is the 1,000 pcs minimum measured per individual tool or per complete set?
- Is the listed dimension the blade length, the overall tool length, or both? Request a dimensioned drawing showing usable blade length, overall length, and handle dimensions.
- Can a single component from an SP range be supplied individually, or only as a selected assortment? Identify the component code and reference photograph.
- Are wooden and PP handles both available for the intended model? The catalog includes both handle families, but material, finish, and customization must be confirmed per model and component.
- Does the quotation identify the exact component selection, packing format, and destination?
For logo and custom packaging, the listed threshold is 2,000 pieces on all three PP handle pages. Discuss artwork position, finish, packaging layout, and the order unit before approving a private-label project. A cake icing spreader packaging brief for buyers should state the component code, quantity, logo artwork, packing requirements, and destination so the reply can be prepared against a defined brief.
Approval steps that keep sampling consistent
- Shortlist by blade geometry: offset, angled, or straight, based on the decorating task.
- Record the component reference and listed size for each requested item.
- Request a drawing matched to the photograph, especially where several lengths share a model family.
- Confirm sample cost, freight, logo options, and packaging minimum for the selected configuration.
- Approve the exact configuration and final packing list before bulk production.
To obtain a price for a specific model, include the model reference such as SP-PP01, SP-PP02, or SP-PP03, the selected pieces, quantity, packing or logo requirements, destination, and required delivery date. A reference image helps when several blade or handle options appear in the range. The published pages also note that several listed specifications state 1,000 pcs minimum orders and 35–45-day production lead times, with model-specific logo and packaging thresholds, and that current terms should be confirmed for the exact component or set.
Questions can be sent through the contact page. Juneshing is described as a trading and manufacturing company specializing in grill, BBQ, and kitchenware products mainly including spatulas and kitchen knives, supplying through its trading and manufacturing business in Yangjiang. Use the model reference to discuss a defined cake icing spreader brief rather than a general category request.