Choosing the best tool to spread frosting starts with the blade format, not the product name. In the Juneshing catalog, icing spatulas are also described as frosting spatulas or palette knives, and the working angle decides how the tool behaves across a cake surface. This guide is written for wholesale buyers who must turn that choice into a defensible purchase brief.
Use the Griddle & Icing Spatulas category to compare the current SP-PP family, then confirm every selected attribute against the live model page before quoting.
Match the blade format to the frosting task
Juneshing lists icing spatulas with straight, angled, and offset blade formats, all in the SP-PP handle family with stainless steel blades and PP handles. Each format suits a different working position:
- Offset blade: the blade steps below the handle line. The PP Handle Offset Icing Spatulas, SP-PP01 range includes an angled icing spatula and scraper profiles. Its listed angled icing component, SP-PP01-006, is 25 × 2.5 cm at 61 g.
- Angled blade: the blade works across a cake surface while the handle stays above the working area. The PP Handle Angled Icing Spatulas, SP-PP02 lists component SP-PP02-008 at 29.5 × 3.6 cm and 61 g, which the page presents as the longer option versus SP-PP01.
- Straight blade: the blade follows the handle line, giving a different working angle from an offset spatula. The PP Handle Straight Icing Spatulas, SP-PP03 lists component SP-PP03-004 at 35 × 3.3 cm and 119.7 g.
Because these models share a handle family and a similar product type, buyers should not treat them as interchangeable. Specify the component code and the blade geometry you need, then sample that exact configuration.
Compare only current verifiable model attributes
The table below repeats only attributes stated on the live product pages. It is a starting point for a purchase brief, not a substitute for the approved drawing or final packing list.
| Model | Listed product type | Listed icing component | Listed size | Listed weight |
|---|---|---|---|---|
| SP-PP01 | Offset icing spatula, PP handle | SP-PP01-006 (angled icing spatula) | 25 × 2.5 cm | 61 g |
| SP-PP02 | Angled icing spatula, PP handle | SP-PP02-008 (angled icing spatula) | 29.5 × 3.6 cm | 61 g |
| SP-PP03 | Straight icing spatula, PP handle | SP-PP03-004 (straight icing spatula) | 35 × 3.3 cm | 119.7 g |
All three pages state stainless steel blades with PP handles. The same pages also show scraper components with separate references and dimensions, such as SP-PP01-019 at 24.3 × 10 cm and 118.2 g, SP-PP01-021 at 28.4 × 8.3 cm and 79 g, and SP-PP03-017 at 33.3 × 7.7 cm and 197.4 g. If your assortment mixes icing blades with scrapers, list each reference separately.
Two cautions apply equally across the range. First, the product photographs show a family of shapes rather than a confirmed fixed-piece kit, so you must identify the component code for each requested item. Second, the listed dimensions should be confirmed against a dimensioned drawing showing usable blade length, overall length, and handle dimensions before approval.
Build a sample and quotation brief that survives review
A quote request should remove ambiguity before the supplier prices the job. A useful brief can be organized as follows:
- Model and component: name the model (for example SP-PP02) and the selected component code, not just the blade shape.
- Order unit: the listed minimum order is 1,000 pcs across SP-PP01, SP-PP02, and SP-PP03, and each page asks buyers to confirm whether that quantity is measured per individual tool or per complete set.
- Lead time: the listed production lead time is 35–45 days, with the current schedule to be confirmed.
- Logo and packaging: the listed threshold is 2,000 pieces for logo and custom-packaging requests. Discuss artwork position, finish, packaging layout, and order unit before approving a private-label project.
- Samples: obtain a sample of the exact configuration and approve the final packing list before bulk production.
- Destination and delivery date: include both so the reply reflects your actual purchasing window.
This is also where the packaging brief for buyers belongs. Packaging affects pack dimensions, artwork placement, and the unit that gets quoted, so it should be attached to the component selection rather than treated as a separate afterthought. Ask for current sample cost, freight, logo options, and packaging MOQ for the configuration you are evaluating.
Buyer checks before you commit
Work through these checks in order and keep written answers with the quotation:
- Does the quoted item match the model reference and component code on the live page?
- Is the icing blade separate from any scraper component in the same range?
- Have the listed dimensions been confirmed on an approved drawing?
- Is the minimum order quantity per tool or per set, and does the supplier confirm it in writing?
- Is the 35–45-day lead time current for your order slot?
- Does the packing list reflect the logo and packaging requirements above the listed threshold?
- Has a sample of the exact configuration been approved before bulk production?
Juneshing is described on its site as a trading and manufacturing company specializing in grill / BBQ tools and kitchenware products, mainly including spatulas and kitchen knives. Buyers who need to reach the team can use the contact page and include the model reference, selected pieces, quantity, packing or logo requirements, destination, and required delivery date.
Read the model comparison pages carefully rather than relying on the category listing alone. The category presents the family, while each product page carries the listed specification, minimum order note, lead time note, and packaging threshold you need for a defensible purchase decision.