A bench scraper with measurements is a baking and prep tool that combines a flat scraping blade with a marked scale for portioning or dividing. For wholesale buyers, the practical question is not just whether a scraper has markings, but how to compare current models, confirm the markings, and prepare a quote request that the supplier can answer precisely. This guide uses the live Juneshing catalog and product pages as the evidence base.
Start with the buyer decision, not the label
The search phrase “bench scraper with measurements” usually points to a specific configuration: a rectangular scraper blade with a measuring scale shown along the blade. On the current Juneshing product page, the Stainless Steel Bench Scraper with Scale – GC-P02 is described as a stainless steel bench scraper with a PP handle and a measuring scale shown along the blade. That is the clearest current match for buyers who need scale markings in a dough scraper format.
A second current option is the Wood Handle Dough and Bench Scraper – GC-W01A, which is listed as a stainless steel blade with a wooden handle, a rectangular scraper, and a dough portioning blade. The GC-W01A page does not present a measuring scale as a specified feature, so buyers who require measurements should treat it as a different selection rather than an automatic substitute.
The category page at Griddle & Icing Spatulas Wholesale groups bench scrapers with griddle spatulas and icing spatulas. It advises comparing blade profiles, straight and offset palette knives, PP handles, and wooden handles, then selecting the exact tool shape and model for a wholesale quote. For a bench scraper with measurements, that means confirming the blade profile, handle material, and whether the scale is part of the selected model.
Compare only current verifiable model attributes
Use a side-by-side attribute check before requesting pricing. The table below reflects what the supplied Juneshing pages state; missing values should be confirmed rather than assumed.
| Attribute | GC-P02 | GC-W01A |
|---|---|---|
| Product type | Bench scraper with measuring scale | Wood handle dough scraper |
| Blade material | Stainless steel | Stainless steel |
| Handle | PP handle | Wooden handle |
| Selection | Rectangular dough scraper with a measuring scale | Rectangular scraper and dough portioning blade |
| Listed dimensions | Request confirmed drawing; dimensions not stated on the page | 162 × 117 mm; confirm approved drawing |
| Listed minimum order | 1,000 pcs; confirm whether quoted per tool or per set | 1,000 pcs; confirm whether quoted per tool or per set |
| Listed production lead time | 35–45 days; confirm current schedule | 35–45 days; confirm current schedule |
| Logo / custom packaging threshold | Listed threshold 2,000 pieces | Listed threshold 2,000 pieces |
Both product pages state that the listed minimum is 1,000 pcs and the listed production lead time is 35–45 days, and both state a listed threshold of 2,000 pieces for logo and custom-packaging requests. These are listed terms, not guaranteed terms; the pages themselves direct buyers to confirm the current schedule and order unit in the quotation.
Check the measuring scale before you design packaging
The GC-P02 page advises requesting a dimensioned drawing before designing packaging or specifying an exact blade width, and confirming that the markings use the units required in your market. That is the central buyer check for any bench scraper with measurements: the existence of a scale is not enough if the units, blade width, or overall height do not match the intended range.
The GC-P02 page also notes that samples and packaging options are available for discussion, with current sample cost, freight, logo options, and packaging MOQ to be confirmed for the selected configuration. For GC-W01A, the page lists 162 × 117 mm and asks buyers to confirm the final drawing and packaging allowance with the approved sample.
When comparing the two current models, keep the decision tied to the intended worktop and preparation task. The category page notes that the selected tool should match the intended worktop and preparation task. It also advises checking the cooking-surface manufacturer’s guidance before specifying metal utensils for coated cookware, which is relevant if a scraper will be used near coated surfaces.
Prepare sample and quotation checks
The secondary angle, bench scraper with measurements wholesale quote requirements, is best handled as a structured purchasing brief rather than a vague request for “best price.” Use the following checklist to keep sampling and bulk-order comparisons consistent.
- Model reference: Name GC-P02 or GC-W01A explicitly, and add the component reference if you are choosing from a range.
- Drawing: Ask for a dimensioned drawing showing usable blade length, overall length, handle dimensions, and scale units where applicable.
- Quantity and unit: State the quantity and ask whether the listed minimum applies per individual tool or per complete set.
- Packing and logo: Describe the packing format, logo artwork position, finish, and packaging layout before approving a private-label project.
- Destination and schedule: Include the destination and required delivery date, and ask the sales team to confirm the current production schedule.
- Sample approval: Obtain a sample of the exact configuration and approve the final packing list before bulk production.
The GC-P02 page specifically suggests adding a reference image if you are choosing from several blade or handle options. The category page makes a similar point: identify the blade profile, component reference, overall length, and handle material in your request, and ask for a drawing matched to the photograph where several lengths share a model family.
Use the category and contact route for the quote
The current Juneshing catalog groups these tools under Griddle Spatulas, Icing Spatulas & Scrapers, and the category page invites buyers to find stainless steel griddle spatulas, cake icing spatulas, and bench scrapers for cooking and baking assortments. For a bench scraper with measurements, the category view is useful for comparing related shapes without conflating a measuring-scale scraper with a plain dough scraper or an icing spatula.
The contact page shows an enquiry form and lists a sales contact for wholesale discussions. Juneshing describes itself on the product and contact pages as a trading and manufacturing company specialized in grill / BBQ tools and kitchenware products mainly including spatulas, kitchen knives, and similar items. Buyers should still confirm the current quotation terms for the exact model, quantity, packing, and destination.
In short, treat GC-P02 as the current measuring-scale bench scraper shown in the catalog, treat GC-W01A as the wood-handle alternative without a listed scale, and build your quote request around drawings, units, quantities, packing, and sample approval. That approach keeps procurement decisions grounded in verifiable catalog details rather than assumptions about size, markings, or order terms.