If you are sourcing a bench scraper bread tool for a bakery or kitchenware range, the practical question is not just “which blade?” It is which model, packed how, quoted against what unit, and supported by which approved drawing. This guide walks through the current Juneshing bench scraper options and gives you a buyer-side checklist before you request a wholesale quote.
Answer the exact buyer intent
For bread and dough work, a bench scraper is used to portion dough, transfer ingredients, and tidy a compatible preparation surface. The Juneshing catalog lists two bench scraper models in the Griddle Spatulas, Icing Spatulas & Scrapers category, and neither is identical. The right choice depends on whether you want a handle-free measuring scale, a wooden handle, or both in one assortment.
The source pages do not claim bakery-specific performance, nor do they claim country-specific availability. Those are buyer-side questions to resolve in the quotation and sampling stages.
Compare only current verifiable model attributes
The table below reflects only what the live Juneshing product pages state. Anything not listed here should be treated as unconfirmed until the supplier provides a dimensioned drawing or written specification.
| Attribute | GC-P02 | GC-W01A |
|---|---|---|
| Product type | Bench scraper with measuring scale | Wood handle dough scraper |
| Blade material and finish | Stainless steel blade | Stainless steel blade |
| Handle | PP handle | Wooden handle |
| Selection shape | Rectangular dough scraper with a measuring scale | Rectangular scraper and dough portioning blade |
| Listed dimensions | Not listed on the page; request the drawing | 162 × 117 mm; confirm approved drawing |
| Listed minimum order | 1,000 pcs; confirm whether per tool or per set | 1,000 pcs; confirm whether per tool or per set |
| Listed production lead time | 35–45 days; confirm current schedule | 35–45 days; confirm current schedule |
| Listed logo and custom packaging threshold | 2,000 pieces | 2,000 pieces |
Two points matter most here. First, the GC-P02 page does not publish a blade width or a scale unit, so a “six-inch bench scraper” request must be stated explicitly and confirmed against a drawing. Second, the GC-W01A page lists 162 × 117 mm, but the page itself tells buyers to confirm the final drawing and packaging allowance. Treat both as starting references, not finished specifications.
Choose by task, not by name
- Portioning and scaling: GC-P02 pairs a stainless steel blade and PP handle with a measuring scale shown along the blade.
- Wooden handle preference: GC-W01A combines a broad rectangular stainless steel blade with a wooden handle.
- Assortment building: the category page suggests comparing blade width, handle clearance and scale markings when building a baking-tool range.
The category description also notes that a scraper or griddle turner serves a different task from an icing blade, so avoid substituting an icing spatula for a dough scraper in a bread-focused program.
Provide sample and quotation checks
The Juneshing pages list 1,000 pcs as the minimum order for both models, with a 35–45-day production lead time, and note that current terms must be confirmed for the exact component or set. Before you treat those numbers as final, work through the checks below.
- Confirm the order unit. Both product pages ask the sales team to confirm whether 1,000 pcs is measured per individual tool or per complete set.
- Confirm the drawing. Ask for a dimensioned drawing showing usable blade length, overall length and handle dimensions before approval.
- Confirm scale units. The GC-P02 page asks buyers to confirm the markings use the units required in their market.
- Confirm the sample configuration. The pages advise obtaining a sample of the exact configuration and approving the final packing list before bulk production; this is a buyer verification step.
- Confirm logo and packaging terms. The listed threshold is 2,000 pieces for logo and custom-packaging requests, with artwork position, finish, packaging layout and order unit to be discussed.
- Confirm destination and schedule. The quote request asks for quantities, logo artwork, packing requirements and destination so a relevant reply can be prepared.
A complete bench scraper bread wholesale quote requirements package should therefore include model reference, selected pieces, quantity, packing or logo requirements, destination and required delivery date. The GC-P02 page specifically advises adding a reference image when choosing among several blade or handle options.
What to send for each model
- GC-P02: model reference, selected pieces, quantity, packing or logo requirements, destination, required delivery date, and an explicit size requirement if a six-inch format is needed.
- GC-W01A: model reference, selected pieces, quantity, packing or logo requirements, destination, required delivery date, and any blade-edge or handle-attachment questions.
Because the GC-W01A page lists 162 × 117 mm while the GC-P02 page does not list dimensions, your quote request should not assume the two models share a blade footprint.
Link to the matching category and current products
The category page at Griddle Spatulas, Icing Spatulas & Scrapers shows both bench scrapers alongside griddle turners, icing spatulas and related sets. Individual product pages are available for the Stainless Steel Bench Scraper with Scale GC-P02 and the Wood Handle Dough and Bench Scraper GC-W01A.
Juneshing describes itself as a trading and manufacturing company specialized in grill and BBQ tools and kitchenware products mainly including spatulas and kitchen knives. The contact page lists a factory location in Yangjiang, an email address, and a WhatsApp number. Those are company-provided contact details; they are not evidence of a specific certification, delivery policy, or country-specific service level.
Distinct decision angle
Rather than comparing materials alone, use the quote unit as the deciding lens. If your program needs scaled portioning, GC-P02 is the model with a listed measuring scale. If your range favors a wooden handle, GC-W01A is the listed wooden-handle option and is the only one of the two with a published dimension. If you need both, treat them as two separate quote lines with separate drawings and separate sample approvals.
Keep the sourcing file consistent: one model reference, one drawing, one packing list, one destination. That approach keeps sampling and bulk-order comparisons aligned and reduces the chance of approving a configuration you cannot repeat.