An offset metal spatula is a spatula whose working blade sits on a step or bend away from the handle line, letting the user spread or lift while the hand stays clear of the surface. In B2B sourcing, the term covers several tool families, and the listed catalog only supports part of that ground. Use this guide to separate what a product page states from what your brief still needs to define.
What “offset metal spatula” covers — and what the catalog proves
The current Juneshing range lists PP-handle offset icing spatulas and angled icing spatulas among its icing and scraper selections. The stated construction is stainless steel blades with PP handles. That is a metal-blade tool with a non-metal grip, not a fully metal spatula.
No all-metal offset spatula is proven in the supplied pages. If your brief requires an all-metal body, record that as an open specification rather than assuming it applies to a listed model. The category text also describes offset palette-knife profiles for spreading and smoothing, which is a different task from turning food on a griddle.
Two dimensions anchor the offset discussion. The angled icing component SP-PP01-006 is listed at 25 × 2.5 cm and 61 g. The angled icing component SP-PP02-008 is listed at 29.5 × 3.6 cm and 61 g. These are component references within model families, not standalone product codes you can treat as a full assortment.
Offset and angled icing spatula listings: a comparison table
The table below uses only listed specifications. Blanks mean the supplied source text did not state that item for this model; they are not assumptions of absence.
| Check | SP-PP01 | SP-PP02 |
|---|---|---|
| Product type as listed | Offset icing spatula, PP handle | Angled icing spatula, PP handle |
| Blade and finish | Stainless steel blades | Stainless steel blades |
| Grip | PP handles | PP handles |
| Selection | Angled icing and scraper profiles | Angled icing and scraper blade options |
| Anchor component | SP-PP01-006, 25 × 2.5 cm, 61 g | SP-PP02-008, 29.5 × 3.6 cm, 61 g |
| Listed minimum order | 1,000 pcs; order unit to confirm | 1,000 pcs; order unit to confirm |
| Listed production lead time | 35–45 days; schedule to confirm | 35–45 days; schedule to confirm |
| Listed logo and custom packaging threshold | 2,000 pieces | 2,000 pieces |
Both pages state that the primary images may show a family of shapes rather than one confirmed fixed-piece kit. Treat photographs as a shortlist, not a bill of materials.
Buyer checks before you request a quotation
1. Confirm blade angle and working shape
The product pages describe an offset blade format for spreading icing and working near an edge, and an angled shape that lets the user hold the handle above the working area. Ask for the approved drawing for the exact profile you want. Compare it with straight palette-knife profiles if your range includes both.
2. Separate blade dimensions from overall dimensions
The category page advises asking whether listed dimensions refer to the blade or the whole tool. Request a dimensioned drawing showing usable blade length, overall length and handle dimensions. This matters for retail pack sizing and for shelf presentations.
3. Fix the order unit in writing
Both product pages list a minimum of 1,000 pcs but ask buyers to confirm whether that quantity is measured per individual tool or per complete set. Your quotation should state the configuration, the order unit and the packing format.
4. Align logo and packaging thresholds
Custom logo and packaging discussion is listed at a 2,000-piece threshold for these models. Confirm artwork position, finish and packaging layout, and obtain a sample of the exact configuration before approving bulk production.
5. Check surface compatibility
If your offset metal spatula will be used on coated cookware, the category page advises checking the cooking-surface manufacturer’s guidance before specifying metal utensils. Keep that as a buyer responsibility in your listing notes.
Specifications still unknown
The supplied pages do not state edge flexibility, blade thickness, exact step height, country of origin marking, or dishwasher guidance. They also do not prove a fully metal handle option or a rigid metal scraper in this family. Do not carry those points into a quote request as if they were confirmed properties. Ask the sales team with the model reference and your question.
For an alternative shape comparison, the category page lists griddle, icing and scraper tools together, and the model pages for SP-PP01 and SP-PP02 show the individual component references.
Frequently asked questions
Is an offset metal spatula the same as a griddle turner?
No. The category page distinguishes griddle turners, selected for lifting and turning food, from icing spatulas with palette-knife profiles for spreading and smoothing. Match the blade to the working task.
Are the listed offset spatulas all metal?
The listed SP-PP01 and SP-PP02 tools are described as stainless steel blades with PP handles. A fully metal offset spatula is not evidenced in the supplied pages, so confirm any all-metal requirement separately.
What size is the listed offset icing component?
SP-PP01-006 is listed at 25 × 2.5 cm and 61 g. Confirm whether you are ordering that component alone or a selected assortment with other SP-PP01 tools.
What should a quotation request include?
Include the model reference, selected component codes, quantity, packing or logo requirements, destination and required delivery date. Add a reference image if you are choosing between several blade shapes.