A bench scraper is a flat-bladed tool used to divide dough, move ingredients and clear a compatible preparation surface. Buyers searching for a bench scraper in Canada usually want to know which formats exist, what is actually documented, and what still needs confirming before an order. This guide sticks to the two bench scraper models currently described in the Juneshing catalog and separates listed facts from buyer checks.
What the catalog actually lists
Two bench scraper formats are shown in the Griddle Spatulas, Icing Spatulas & Scrapers category. Both are described as rectangular scraper formats suited to dough portioning, ingredient transfer and tidying a compatible preparation surface.
| Model | Blade and handle | Listed dimensions | Listed minimum order | Listed production lead time |
|---|---|---|---|---|
| GC-W01A | Stainless steel blade with wooden handle; rectangular scraper and dough portioning blade | 162 × 117 mm; confirm approved drawing | 1,000 pcs; confirm whether quoted per tool or per set | 35–45 days; confirm current schedule |
| GC-P02 | Stainless steel blade with PP handle; rectangular dough scraper with a measuring scale | Not listed as a full dimension set; request a dimensioned drawing | 1,000 pcs; confirm whether quoted per tool or per set | 35–45 days; confirm current schedule |
For GC-W01A, the page states a 162 × 117 mm listed dimension and the wooden handle. For GC-P02, the page states a PP handle and a measuring scale shown along the blade, but does not list a full dimension set on the page. Any specific blade width, overall height or unit of measure should come from a confirmed drawing, not from an assumption.
Wooden handle or PP handle with scale?
The two models differ mainly in handle material and whether the blade carries a measuring scale, based on the listed descriptions.
- GC-W01A: wooden handle, broad rectangular stainless steel blade, no scale described in the listing.
- GC-P02: PP handle, stainless steel blade, measuring scale shown along the blade.
If a measuring scale is part of the intended range, GC-P02 is the model whose listing mentions one. Confirm that the markings use the units required in your market before designing packaging or finalising a spec sheet.
Checks to make before requesting a quotation
Treat the listed numbers as a starting point for a conversation rather than a final commitment. Useful checks include:
- Order unit. Both listings state a 1,000 pcs minimum order but ask whether this is quoted per individual tool or per complete set.
- Production schedule. Both listings state 35–45 days. Confirm the current schedule for the exact configuration you intend to buy.
- Drawings. Ask for a dimensioned drawing for the selected model, especially for GC-P02 where a full dimension set is not listed.
- Scale units. If the measuring scale matters, confirm the units used on the blade markings.
- Handles and finish. Review blade edge finish and handle attachment, and confirm suitability for the worktop or cookware surface the end customer will use.
- Samples. Obtain a sample of the exact configuration and approve the final packing list before bulk production.
Logo, custom packaging and private label
Both listings state a 2,000-piece threshold for logo and custom-packaging requests. If a private-label bench scraper range is the goal, discuss artwork position, finish, packaging layout and the order unit before approving the project. The listed threshold is a published figure; the exact terms for your configuration still need confirmation in a quotation.
A useful first step is to prepare a short brief rather than an open-ended enquiry. Include the model reference, selected pieces, quantity, packing or logo requirements, destination and required delivery date. Adding a reference image helps where several blade or handle options are being compared.
What the source does not establish
The catalog does not state a Canada-specific SKU, Canadian stock, Canada-only pricing, local warehousing, delivery times to Canada or any certification. It also does not establish retail availability or a comparison against third-party brands. Those points are simply not documented here, so they should not appear in a specification sheet or a product listing. Where a detail is unknown, the honest approach is to record it as a question for the supplier rather than fill the gap with an assumption.
Frequently asked questions
What dimensions are listed for a Juneshing bench scraper?
The GC-W01A product page lists 162 × 117 mm and advises confirming the final drawing and packaging allowance against the approved sample. For GC-P02, the page describes a measuring scale along the blade but does not list a full dimension set, so a confirmed drawing should be requested.
Are the listed minimum order and lead time the terms I will be quoted?
Both product pages list a minimum order of 1,000 pcs and a production lead time of 35–45 days, and both ask buyers to confirm whether the quantity is per tool or per set and to confirm the current schedule. Treat the listed figures as the published starting point and get the exact terms confirmed for your configuration.
Do the bench scrapers ship to Canada, and what about customs or duties?
The catalog does not document destination-specific shipping, customs handling or duties for Canada. Your quotation should identify the destination so the team can respond to the actual case, and any import questions should be raised with the seller or a qualified adviser rather than assumed from the product page.
Is the blade dimension the same as the overall tool length?
The category page advises asking for a dimensioned drawing showing usable blade length, overall length and handle dimensions before approval. A single listed figure should not be read as covering all three.